Telstar5 and skyview rx-600

 

New member
Username: Younes

Post Number: 1
Registered: Jul-06
i have an SKYVIEW RX-600 abd a 33inch dish with a low freq LNB but i stii can`t get telstar5 the quality bar is at 71% but no strenght .

any ideas?
 

Bronze Member
Username: Concorde

Post Number: 13
Registered: Jul-06
got the wrong frecuency set
you need a universal lnb(linear) capable of 9750 to 10750 frec. if you do, set as follows.
lnb type universal
lnb frec 9750 to 10750
try to input this transponder 11986V or 12022H
those transponders will give you a strong signal
 

New member
Username: Younes

Post Number: 2
Registered: Jul-06
i used the angle calculator to make sure i have the right settings.still can`t get it to show
 

New member
Username: Younes

Post Number: 3
Registered: Jul-06
i use the angle calculator to make sure i had the right settings,still can`t get it to work
 

New member
Username: Younes

Post Number: 5
Registered: Jul-06
under LNB type i only have two options normal or ocs-dp,any clue?
 

Bronze Member
Username: Concorde

Post Number: 37
Registered: Jul-06
what is normal? if normal means standard . that only means you are stock with dish or Bev programing.
your receiver cannot get linear fta. check the manual about lnb types use
 

New member
Username: Younes

Post Number: 6
Registered: Jul-06
i can not find a reciever that has Linear fta and it`s feature?
 

New member
Username: Younes

Post Number: 7
Registered: Jul-06
so the new SKYVIEW RX-600 is not good for anything else then dish i guess?that sucks because i thought it was one of the best out there.what a Disappointment
 

New member
Username: Younes

Post Number: 8
Registered: Jul-06
does anyone know of a cheap receiver that can get linear fta?
 

Bronze Member
Username: Abdou91

514

Post Number: 37
Registered: Jun-06
younes verifie if the 22 ..khz is on
Diseq
 

New member
Username: Younes

Post Number: 9
Registered: Jul-06
yeah the 22khz is on ,i am pluging it directly to the LNB so no Diseq
 

New member
Username: Brittny

Post Number: 1
Registered: Jul-06
can someone please tell me the new file for skyview rx600 receiver, its been down for two weeks now!!!!!!!!!!!!!!
 

New member
Username: Younes

Post Number: 10
Registered: Jul-06
you should be able to get local channels until the fix come out but the whole point here is that, can you use the skyview to view channels in telstar5?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us