before the box where you place the keys is a box where you insert 2 numbers before the keys what numbers do I put in those boxes because these keys are not working for me so I am assuming these numbers need to be changed
In Parental control,, go to second pin and enter your code (usually 0000) Next set Autoroll OFF for BEV. Go to Nigravision 2.
Provider ID. Use left and right arrow to get to 09 01 That is the ID for BEV. If you do not have it in your box, you go right arrow till you come to FF FF Change this to 09 01. Now you have Bev ID Next box down is Key number. It should say 00. If you started with FF above it will say FF and you change it to 00 Go down to Key Data. It will be arranged as one row of 16 two digit numbers or two rows of 8 two digit number. This is where you key in the "Inactive" key which at present is 0C B7 0A F9 50 75 F3 5B 31 EC 79 97 5C D7 CE 1A (inactive Key 00 or 96) Go back up to Key number. Right arrow should change this to 01. if FF change it to 01. Go down and enter the active key, which is D1 15 0C 8E 66 82 D9 80 90 A9 20 20 37 07 87 08 (active Key 01 or 86) Check all entries, and Press OK to save. Exit. Set autoroll ON. exit. Exit, Exit till you see a picture. If it does not work, try putting in the key data opposite to what I said about Key 00 and and Key 01.