Pansat 3500
|
New member Username: Alex_atlPost Number: 1 Registered: Jun-06 | HELLO im new with this and i just bought pansat 3500 what do i need to do to start? PLEASE HELP.thx |
|
Gold Member Username: The_wank_artistPost Number: 1094 Registered: Feb-06 | Read. |
|
New member Username: Alex_atlPost Number: 2 Registered: Jun-06 | read where? TYLER |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1229 Registered: May-06 | alex check your email. |
|
Bronze Member Username: HybridfayMississauga, Ontario Canada Post Number: 86 Registered: May-06 | do we have to wait more for 61.5 |
|
New member Username: Alex_atlPost Number: 3 Registered: Jun-06 | HELLO EVA i have sent ya email from my AOL account please help. THX |
|
Bronze Member Username: RadamesPonce, Puerto Rico Post Number: 16 Registered: Jun-06 | alex; Welcome to our family of 3500 pasat. First a now the PPV and X channel no work. Second check your bin of your pansat the last vertion is 3.53 If you any more info write. rada |
|
New member Username: Hammer57Post Number: 1 Registered: Jun-06 | where can i get a copy of that bin to program my pansat 3500? |
|
New member Username: Alex3500Post Number: 3 Registered: Jun-06 | Guys i have also just bought the PANSAT 3500 can someone sent me instructions on where do i start ? I have Super Dish that has 121 119 and 110. i would really appriaciate if i can get some kind of feedback from you guys. |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1243 Registered: May-06 | Setup Instructions for Pansat 3500s (Using the Null Modem Cable): November 22.2005 1) Download the latest code bin for the Pansat 2) Then download a channel list if you like, that matches your sat setup, with careful attention to your type of sat LNB (Legacy or Dishpro). Also be aware of TP changes. 3) If you are going to use a channel list, make sure it is properly formatted: ie. Project Type = 3500; Sat Properties (Ports = Antenna Setup on IRD), and; is in the "bin" format. 4) Connect the twisted null modem cable that came with the 3500 and connect one end to a serial com port on your computer and the other end to the 3500's RS232 9-pin serial port at the back of the unit. 5) Now plug in the Pansat 3500. Make sure the power button on the back of the 3500 is set to off. 6) Open the loader program. 7) Select the correct serial com port settings (ie. COM 1) and ensure the default fileBaud Rate is set to 115200. File Type should be defaulted to App File Only. 8) Click on the Bin File button, and locate the latest bin (X-05BL-051118- 122eubx.bin) that you had just downloaded into your computer and open the file. 9) Before you download the file to your computer, turn your 3500 ird ON via the back power switch. The led will light up in the front panel. 10) Now click the download button and wait for the entire download to finish. When the download is completed, the 3500 will reboot and you will see a b-70 on the led of the ird. 11) Once this is done, you can either download a channel list into your ird or do a blind/sat scan. If you prefer the latter, then proceed to step 14. 12) As mentioned, the Channel List must be in "bin" format for the loader to work. If the channel list is in Channel Master format (*.cmproj), you will need to save the file into a "bin" format. Follow the SD Card Setup Guide for the 3500 in Appendix 1. 13) Download the bin formatted channel list using the loader. Click on Bin File and locate the file on your computer. Make sure you select Channel Data as the File Type.14) When the download is complete, turn off your 3500 via the power switch on the back panel and unhook it from the computer. Take the 3500 to TV area and do all the appropriate hookups (satellite cable to F-in, component video out to tv, digital optical audio to audio receiver or tv, etc.). 15) If you decide not to load a channel list and opt instead to do a blind or satellite scan, then turn off your 3500 via the power switch at the back panel, unhook from the computer and do the appropriate hook ups for your tv. 16) Once the hookups are complete, turn on the 3500 ird via back power switch. Once the 3500 boots up, it should automatically bring you to the language menu. Select your preference (English) and then press OK on the remote control. 17) Back to the Main Menu, press OK on Installation and enter the password "0000" in the password popup screen. You will then arrive at the Installation Setup. 18) Press OK on Antenna setup 19) At this point, select the satellites you are equipped to receive. The echostar 8.6 represents the 110 sat and the echostar 7 represents the 119. On each sat, input the DiSEqC settings and ensure they reflect your rooftop connection setup. Then examine to ensure you have adequate signal level and quality for each sat. 70% and over is considered a good signal. The following are common settings in the Antenna Setup for Legacy LNBs: i) LNB = Standard; ii) Frequency by default = 112500; iii) 22 kHz = Off iv) DiSEqC = echostar 8.6 (110) > LNB # 1 (If you plugged the 119 cable into the LNB 2 of the switch) echostar 7 (119) > LNB # 2 (If you plugged the 119 cable into the LNB 2 of the switch) v) Skew = Only needed if you have a motorized dish. 20) Exit the Antenna Setup and you should be back to the Installation screen. Scroll down to Edit TP/Satellite and press OK. 21) Press OK on either the sat echostar 8.6 or echostar 7, and press OK again. Rename each using your remote key pad to Echo 110 and Echo 119, respectively as stated. When complete, exit back to the Installation screen. 22) At the Installation screen, scroll down to the type of scan you would like to proceed with and press OK: 23) The Blind or Satellite Scan is recommended, with preference to a Blind Scan. (The TP scan is normally done after TP changes occur.) 24) To begin, select the target satellite to be scanned (either Echo 110 or Echo 119) and press OK for the scan to begin. It should now scan the selected satellite. Each sat scan should take about 5 -- 10 minutes. If the scan fails at anytime, repeat the same steps. 25) Once complete, scan the other satellite(s) in the same manner. 26) When the scans are complete, exit out of all programs. Now hit the Menu button on the remote to take you back to the Main Menu. 27) This is an important step. Scroll down to Parental Control and press okay. Then at the popup, scroll down to the second Pin and enter "0000." 28) This will take you into the CAS system menu: 29) Scroll down to Set default key and press OK. At this point, you can scroll up to Nagravision 2 and view the screen for manually inputted new keys. (Subsequent bins are expected to contain an autoroll key feature.) 30) Anyway, exit out of the CAS system back to the Main Menu and scroll down to User Setup. Press OK: 31) Language should be already set to English. 32) It is important that you configure the Time Settings properly for a good EPG. First set the Time zone. Use your volume buttons on the pansat remote to change your GMT time setting (ie. Eastern, Mountain, etc.). 33) Then scroll down to the Current Time and press OK. Use the remote's number pad channel buttons to input year, month, date and time. 34) Exit out of all menu screens. Now press the SAT button on your remote. In the next screen, scroll down to Echostar Package and press OK. Your tv programming should now match that of the Dishnetwork. Finally, pour yourself a rum and koke and watch TV. Appendix 1 SD Memory Card Guide (Pansat 3500s): Follow the procedures in chronological order. Format SD Card: First, you must place the sd card into the ird slot first so that the pansat ird will program format your card into three directories: a) CH Data (channel lists), b) Code (working bins) and, c) MP3 (music). Then, Remove the card from the slot on the ird. Saving Unto SD Card: To save working bins or channels lists unto the sd card, find a good channel list for the sats you have and then use Channel Master or the Pansat 3500 Channel Editor, to modify the list to best suit your needs. In other words, you would likely modify the locals and/or the favourite lists. (Note: Don't forget to get the latest version of the stated programs.) Top Box Settings (Channel Master): Once you modify the channel list, or even before, make sure the list is configured to your specific ird. In Channel Master, you can do this by either right clicking the mouse button on the sat or favorite lists within the window content, or click the Edit on the Tab bar and scroll down and click properties. In the pop up, select the project type (ie. Pansat 2700a, Pansat 3500) and hit OK to exit. Now you have a channel list suited for your Pansat. You can use this file and download into your ird via com port, as is. However, if you want to use your SD Card, you must first convert the channel master document into a "bin" format. Saving the Channel List unto your SD Card: Insert your SD card into the card reader of your computer. In order for the ird to recognize the file on your SD Card, it must first be converted into a "bin" format. To do this, go to File on the Tab menu in the Channel Master program and scroll down to "save as." A pop up directory will appear. Now locate the CH Data directory for your SD card in the drive of your reader (ie. removable drive G). Name your file and then use the scroll down button as to file type. Select Bin Channel Files (*.bcf, *bin). WAIT. This is very important. Whatever you named your file, add the extension bin before saving. For example, the full file name could look like - "Sept27CMList.bin" Now click Save and your bin channel file will be download into your SD Card via the reader. (The Pansat Channel Editor does not seem to have the ability to convert the channel list into a bin file. This is a shame and hopefully, updates to allow this conversion will be forthcoming for this program.) SD Card to Receiver: Now take your sd card with the bin file and plug it into the sd slot of your receiver. Go to Main Menu..and then click on the SD. A pop up should appear with the three directories. Click on Ch Data and select your newly created channel list bin file. Uploading will then occur. When complete, exit program Backing Up Working Bins and Channel lists to SD Card: For backing up a channel list for example, select CH Data and the hit the red button at the bottom of the remote. A pop up will come up to confirm. Select yes. Then use the next pop up to name your file. Once this is done, hit your OK button and a download screen will appear. After download is complete, exit out. You can do the same for the working bins. Just place the backup under the Code directory. |
|
Bronze Member Username: AnchuPost Number: 16 Registered: Feb-06 | hi Eva is there any new bin for fortec life time ultra? please mail me anchu67@hotmail.com |
|
Gold Member Username: The_wank_artistPost Number: 1135 Registered: Feb-06 | Eva, there is a spelling error in line 76. Please correct and re-post! LOL |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1246 Registered: May-06 | NO, no the link 76 is fine, check the venus 69 its the true about all the info lol I will hope some day ecoustics, will have sticky downloads area.  |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1247 Registered: May-06 | And where is Nick? |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1248 Registered: May-06 | anu not new bin if you can see all the channels except, indians, xxx, ppv. So sorry but if you cant see any channels the new bins are in dss*tester.com |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1249 Registered: May-06 | I mean if you cant view none of them (channels in your receiver) go to dss tester and download the latest fix june 10 fix. That is the latest bin. When any site post a new bin to fix the latest issue, you will see all the topic in the thread posted by LK, Tyler or another helping people here, in the meantime, enjoy all the another channels. |
|
New member Username: Doom39Post Number: 1 Registered: Jun-06 | Eva can u help me? I new at this, how to set the viewsat 2000. |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1255 Registered: May-06 | Things you need. ************************************************** * 1.ViewSat2000 2.Computer 3.Null Modem Cable 4.Tv 5.Installed Dish with Switch (DiSEqC) OR JUST USE DISH PRO DISH WITH AUTOMATIC DISEQC SWITCH. ************************************************** ** 1.Find your Null Modem cable, and connect it to your Viewsat, and the Com1 Port on your computer.(May require Reboot) * Leave the ViewSat UNPLUGGED!!!!!!!!!!!!!! 2. save all files in email files to your folder, make a new folder if you have to. *(example: My Documents/Viewsat) 3.Open the program "Loader2" if it doesnt work, you need to install the ZMODEM32.DLL file to your c:/windows/system folder. go to my computer, c:/, windows, system. this is where to copy and paste the zmodem32.dll file, that's it. 4.on loader 2 Click "Open Files" 5.Go to the folder where you saved the files and elect "Vs2000_newsod_v1012.PGM" *(This file name will Change with new versions. Just make sure its the .PGM file)!!!!! done with that one. 6.on loader 2 click on open files, "VS2000CHANLIST2.CHA", and AFTER THAT CLICK OPEN FILES AND PUT IN "VS2000CHANLIST2.SAT". 7.You will notice that you have the 3 files populated in the Loader2 program. 8.Click Pc->STB then Plug In your Viewsat power. (You should see the Files loading properly) 9.Once it is completed, The program will say its done. Now wait for the Viewsat to say "End" on the front display. 10.Power off your Viewsat. HOOK TO TV ** If you still get no picture, Check your port settings for the switch. ***Once you have done this, you will only need to load a new .PGM |
|
Bronze Member Username: RadamesPonce, Puerto Rico Post Number: 20 Registered: Jun-06 | Evadelparaiso: Thank for your support; GRACIAS DESDE PONCE!!! |
|
New member Username: BucknshelleyPost Number: 1 Registered: Jun-06 | New to this... and would like to know if anyone has a working program for their Pansat 3500. I would be much obliged. Thank you |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics