Help Pansat 2700 HELP!!!

 

New member
Username: Bayk

Post Number: 1
Registered: Jun-06
Hi Im a newb in this Sattelite thing
SO please help me out..
i have a pansat 2700 and Have been down for a couple of weeks i cant watch 119
no ppv works.
and I have X-87 BL
API: 1.46_EULX
Boot Ver: 62
18.Mar. 2006
thats wat it says on my box so I dont know wat to do to get the channels working again..
Please help!!
 

Bronze Member
Username: Keanos

Post Number: 26
Registered: Dec-05
new bin 272
 

Bronze Member
Username: Keanos

Post Number: 27
Registered: Dec-05
upload-1149828704-X-87BL_060609_272_api_2 for pansat 2700
 

Bronze Member
Username: Banzai

Post Number: 46
Registered: May-06
Jinukhanh: go either
[link removed]
or http://www.future-fta.info/forum/index.php to get the new BIN.
BTW, some site require the registration inorder to download
 

Bronze Member
Username: Mountainman411

Post Number: 11
Registered: Apr-06
Hate to ask something that may have been answered on the site before, but when I scan for 119, I get 400 or so channels, and right under the channel list on the left side of the screen it says ECHO 119, but under Nagravision it says 110. I've renamed it in TP Edit, same deal. Any suggestions anyone?
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 68
Registered: May-06
It sounds like your LNB is actually Pointing at 110 Ray
 

Bronze Member
Username: Mountainman411

Post Number: 12
Registered: Apr-06
So I need to re-align the dish I guess. I'm looking right now for the correct settings for a pansat 2700a, perhaps a reset and re-load new bin might work.? ........ still new to this, but learning
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 69
Registered: May-06
New Bin wont fix LNB not being Alligned to right Sat
 

Silver Member
Username: The_wank_artist

Post Number: 978
Registered: Feb-06
And now kevn becomes the master.
Good on ya!
 

Bronze Member
Username: Mountainman411

Post Number: 13
Registered: Apr-06
i know. i re-aligned the dish, much better reception to both birds, but still same problem. which ever i scan, it always says echostar 110 under nagravision on the left onscreen channel list. is there a way i accidentally renamed or copied a 110 label and renamed it 119? if so, how can i get the actual 119 back? sorry to keep asking, but ive read all over, and scanned all day, no luck. any suggestions would be appreciated.
 

Gold Member
Username: Evadelparaiso

Puerto Rico

Post Number: 1102
Registered: May-06
RAy: check your disqC configuration.
 

Silver Member
Username: The_wank_artist

Post Number: 985
Registered: Feb-06
10-4 to Eva's suggestion Ray,
Ray, depending on which ports feed which LNBs Ray, you should have them set in your antenna setup the same way.
So if 110 feeds port 1 and 119 feeds port to on your actual DiSEqC switch, it should match in your antenna setup.
 

Bronze Member
Username: Mountainman411

Post Number: 14
Registered: Apr-06
Thats a big 10-4 Eva and Tyler. I thought I was getting good at this till something simpile as p*ss comes along and bites me in the hind end lol. Thanks a million guys, I'm gettin everything now, wife will be very pleased! Now I'm off to watch some TV, and tomorrow start researching BEV, try my hand at that. Thanks, I owe you guys one, if I can ever help anyone let me know. My knowledge is limited, but I'm learnin as I go.
 

Gold Member
Username: Evadelparaiso

Puerto Rico

Post Number: 1110
Registered: May-06
You welcome.
 

Silver Member
Username: The_wank_artist

Post Number: 990
Registered: Feb-06
Ray,
You can help.
Eva and I will need 1 million dollars, in small denomination bills deposited into Swiss Bank accounts for each of us.

BEV should not be a problem. Looking at the dish, LNB on the left side. Keys should be there already with the bin. Take your time, remember too that it takes a couple of seconds for the signal to register with the receiver when you move it, so tweak, wait, tweak wait. And scan the bird to get the channels, or load a BEV channel list first, then just leave a channel on until you get piture.
Best of luck.
 

New member
Username: Bayk

Post Number: 2
Registered: Jun-06
THANK YOU EVERYONE WITH THEIR HELP!!! I REALLY APPRECIATED!!! :-)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us