Newbie need help to get BEV unlocked

 

New member
Username: Redcore

Post Number: 2
Registered: Jun-06
Hi there
I have BEV at home,2 3100 and one old 2700 modified

If I want to get access to everything I guess I have to go with a fta receiver,pansat,etc....But what else do I need to buy with it and where can I found a programmer if I need one.I know where to find some receivers,I live in canada

thanks
J-F
 

Silver Member
Username: The_wank_artist

Post Number: 778
Registered: Feb-06
A cable to connect to the receiver and the box which comes with the receiver usually, and the software.
The software is available at many dss sites, I prefer dsscentral*net.

You should read some of the posts here though because some of the channels are not working at the moment, depending on the receiver you have....
 

New member
Username: Redcore

Post Number: 3
Registered: Jun-06
I havent choose a receiver,is there better than other in the fta receivers for BEV
 

Bronze Member
Username: Er1013

Post Number: 37
Registered: Mar-05
MY PANSAT 3500 WENT DOWN. NEW KEYS OR CURES ANYONE? THANKS.
EDDIE
 

Silver Member
Username: The_wank_artist

Post Number: 780
Registered: Feb-06
Right about now Johnny, the best bet would be a Viewsat Extreme.
 

New member
Username: Redcore

Post Number: 4
Registered: Jun-06
thanks for the info Tyler very appreciated,I cant get the files on dsscentral but I think I can have them from dsstester right?So If I undestand everything correctly,I can download the software and will all the stuff that will come with the viewsat extreme,I will be able to enter the keys I need and I will be in business

Johnny
 

Silver Member
Username: The_wank_artist

Post Number: 781
Registered: Feb-06
You CAN get the files from dss central.
But yes, you would either have to activate the bin file to work the auto roll or manually enter the keys to 'be in business'.
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 39
Registered: May-06
Tyler you Here?
 

Silver Member
Username: The_wank_artist

Post Number: 782
Registered: Feb-06
Maybe????
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 40
Registered: May-06
Sure you are here Tyler?...i posted my problem in another thread ..But I'll restate it. After i had Turned off Auto roll and then entered new BEV Keys and Stored when i return to 00 keys change on me and i have to start all over again. then they change on me again grrrrrrrrrrrrrrrr
 

Silver Member
Username: The_wank_artist

Post Number: 786
Registered: Feb-06
Kevn,
If you're sure that the auto roll is set to off what I would suggest is load an older bin file.
Then try entering the keys manually.
Could have been a corrupt bin or something along those lines.
 

Bronze Member
Username: Ece

California, California Usa

Post Number: 13
Registered: Jun-06
anybody have key for pansat 2500 i use 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC and no working I try D1 15 0C 8E 66 82 D9 80
90 A9 20 20 37 07 87 08 and no working please somebody have right keys pleease..........
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 41
Registered: May-06
Oh and first off...This Thread is about BEV not DISH But here you go Anyway

DN

N 0101 00:

98 F7 44 AC 5E 07 D9 ED
8A FF 3B 7E 65 71 F9 4E

N 0101 01: (active)

71 9C 60 71 04 C1 39 AE
88 FF F0 5E D2 4C F3 FC
 

Silver Member
Username: The_wank_artist

Post Number: 787
Registered: Feb-06
knvn, you get it working?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us