|
Bronze Member Username: Malhib24Post Number: 16 Registered: Mar-06 | i put in the latest keys and was getting all dishnet channels put about 3 days ago my international dish went down and says no siganl. I had just repositioned the dish a few days prior to that to 99% and it was workin fine. My dishnets work fine can someone gimme any pointers |
|
Bronze Member Username: HardrockstrikerPost Number: 46 Registered: Apr-06 | We'll need more details... what sats are you pointing to? Did u make any changes when you lost the signal? etc... Do you lose all channels or just some? Details, bra! Details! |
|
Bronze Member Username: HardrockstrikerPost Number: 47 Registered: Apr-06 | Okay, i just read in another thread that the international channels were moved to another satellite (119?). I haven't verified for myself, yet. Anyways, erase your channel list and do blind scans on both 110 and 119 satellites, and see if they come back. Also, you can check out lyngsat*com for channel lists. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 595 Registered: May-06 | http://www.lyng***sat.com/launches/index.html you can check here for the latest launched satellite. The international are listed. Maybe we need a new bin, keys, or simple wait a little for channels comeback. |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 602 Registered: May-06 | Restore factory settings, set your receiver, add your satellites, scan. |
|
New member Username: PansatmanBristol, Va USA Post Number: 8 Registered: Jun-06 | missing channels how u get back |
|
New member Username: Hatem05California Post Number: 4 Registered: Jan-06 | hi evry one ther'is missing arabic channels on echostar1(148w)can u tell me what happend please? |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 606 Registered: May-06 | The satellite was change. NOt all receiver or bin etc can to do the change, do you need restore factory settings the receiver and set all again if you want you box set the right satellite again. Lucky. |
|
Bronze Member Username: RufidadaPost Number: 27 Registered: May-06 | Hi Will restoring factory settings and doing blind scan work on megasat pro 4000 |