TD give me some help i have fortec lifetime ultra really i am pretty new on this due my position only get 61.5 sat signal my spans channels shows Epg and very good signal but no picture only scrambled or bad channel i got the new key changed TP and nothing happen, please what's wrong with this, tahnks in advance
hi, I am pretty new at this too. I been following the thread, and I entered the same keys from above. Still no luck. I have a fortect lifetime classic NA. running may 15 latest bin. help please
- Load the latest May15th bin - Go to Menu / Channel / Code (1001) - Hit Setdefault keys before you enter new ones - Exit the Code screen to save the keys - Go back again to Code - Enter All four keys as above and exit
Thanks alot for the help, but I actually figured it out. I just wanted to write how I solved my problem to help someone else.
1. Cleared all channels 2. Factory reset 3. Default keys - in (Nav Screen) 4. Turn off box/ then On 5. Set time and Date 6. Put in Keys When putting in keys, do not change the provider number. This is the mistake I was making.
You should see something like this. Dish 0101 00 E8 70 B0 0A 8E 0A 3D C5 Dish 0101 00 F3 59 C3 5F 1A DA 19 5C Dish 0101 00 71 9C 60 71 04 C1 39 AE Dish 0101 00 88 FF F0 5E D2 4C F3 FC
Don't change the header [0101 00] only change the body with the new codes
Dish 0101 00 [ body ] rescan and you should be fine. thanks again I really appreciate the help.