1. MAIN MENU 2. GO TO 'Installation' (PRESS OK) 3. GO TO 'Edit Code' (PRESS OK) 4. GO TO N-CODE (PRESS OK) * N-CODE : Nagravision Code (for Dishnet and Bellvu) 5. SELECT PP (PRESS OK) * Dishnet : 1801, Bell : 1234, Globecast : C0001 * If your current channel is on the Bellvu, the cursor bar will be automatically on the 1234 section. 6. GO TO : PP 1234, ID 01 at first (PRESS OK) * Exercise sample Nimiq N2 Keys (bellvu) Key1: xx xx xx xx xx xx xx xx * Key 0 = ID 01, Key 1 = ID 11 7. MOVE TO 'CODE' PART (PRESS OK) 8. SELECT EACH CHARACTER BY PRESSING 'OK' BUTTON * 16 characters * E Key0: xx xx xx xx xx xx xx xx 9. AFTER ENTERING 16 CHARACTERS, PRESS 'MENU' * By pressing MENU, the new key will be stored * Don't press OK or Exit button * E Key0: xx xx xx xx xx xx xx xx 10. PRESS 'MENU' AGAIN. * Don't press OK or Exit button * E key: xx xx xx xx xx xx xx xx 11. MOVE TO : PP 1234, ID 11 * E Key1: xx xx xx xx xx xx xx xx 12. MOVE TO 'CODE' PART (PRESS OK) 13. SELECT EACH CHARACTER BY PRESSING 'OK' BUTTON * 16 characters * E Key1: xx xx xx xx xx xx xx xx 14. AFTER ENTERING 16 CHARACTERS, PRESS 'MENU' * Don't press OK or Exit button * By pressing MENU, the new key will be stored E. Key1: xx xx xx xx xx xx xx xx 15. PRESS 'MENU' AGAIN * Don't press OK or Exit button 16. AFTER FINISHING BOTH NEW KEYS <key0>, PRESS 'MENU' SEVERAL TIMES, THEN YOU CAN GO OUT FROM 'EDIT CODE'. AFTER THAT, YOU CAN HAVE PICTURE AGAIN.