when i flashed new bin 142 it says it in the lower right hand corner of the main menu but when flashed with 143 bin still states that it is programmed to the 142 bin? and transponders: i have 99% signal on 110 but only a few transponders others are 0% and when i did my blind scan all i picked up was locals from all over us and about 40 japanese and foreign channels?
So,you got problem...sounds to me, like LNB setting is ~~~ I use it for all birds one universal LNB(C and L).plus pansat 4x1 diseq switch. This is my setting .
HA HA,I just changhed cables on LNB,from Cir. to Lin.. and did blind scan....so I got only 48 channels,but before was 300+ Like I told you LNB = your problem,no bin!
ok i flashed with 143 bin from future fta and my lnbf is from eman's complete 3500sd system receiver,dish,lnbf with dual out lnb add-on how do i delete 142 bin or shouldnt it just overwrite it and say 143 on main menu what about transponder/signal issue is that the lnbf?
When you purchase a satellite system from us, you can point your dish to one of the great satellite (Intelsat Americans 5) this copy/paste from emantechnology .Its mean you got only Liner LNB and lnbf with dual out ,Its for TWO RECEIVERs
"how do i delete 142 bin or shouldnt it just overwrite"...... You cannot delete .Or you gonna flash with original bin,and then flash with some Bin XXX ,or overwrite it with SD card