Every time I try to download the 272T2 bin in to Pansat2500a, it starts downloading,after about 10sec the reiciver turnes off then on and I get a Flush Update Fail Messege. Does enyone know what could be the problem? Please Help!
flash failed = wrong or defective cable or SERIAL port (NOT Usb port)...use a straight cable if U have a pansat 2500 or clone ..may have to change comports..
I tryed all 4 different com ports and it is doing the same thing flash failed. I was wondering if I have to flash my pansat 2500a whith the original pansat bin file befor I try and load the 272t2 bin. And steel cant locate the black list loader if someone could tell me please what is it called
hello all. I have a Pansat 2500A and one dish positioned for T5; I downloaded the 271t bin and the channel list that included echo9,10 (of course none of those showed up since the dish is not pointing to them). So I made a blind scan. I can receive all FTA and globecast for T5 but no Nagravision (setanta sports, Euronews ..) I did the "default keys" but it did not work. Then I found the newer bin 272t2 and downloaded it. It worked the same way. Still no Nagravision. Any advice? Thanks
nick..yes I would upload the factory bin first, If U 've never used the receiver before..otherwise, U have a bad cable or mostly like using the wrong comport or a USB port instead of a SERIAL port!...and Blacklist loaders are everywhere at every DSS site..like cars on a highway!...have to be blind, not to see or find..
CH...no nagravision cause U have no nagravision channels/Dishnet or Bev scanned into the receiver..
LK, thanks, I did what you suggested above, but still get scrambled or bad signal on Setanta sports, Euronews and all other nagravision. The receiver can see them in the channel list, they have good signal quality, but cannot be displayed. Here is what I did: downloaded the bins and updater above, installed the 224 bin with the blacklist updater, then the 272t bin withthe same program. (I waited until complete in both cases, but there was a small difference that I do not know whether it had any effect: with the 224 bin, the updater displayed progress from 0 to 100% in sync with the pansat display (0 to 100). Whereas in the 272t bin, the pansat display was ahead by almost twice the number (it went from ?? to 192%) Then I went to parental control, and chose default keys. Blind scan got back all the channels, but as above, nagravision was still scrambled/bad.