if i do a factory reset all channels errase how can i get them back without downloading stuff
Letmeon
Unregistered guest
Posted on
Factory reset is the initial program (DO NOT USE) then all nagra 2 would be gone. DO channel edit, delete all channels, then blind scan on 110, 119. (for pansat rec.) If missing a few channels wait for complete Keychange to happen.
After doing factory reset.... From the MAIN MENU: selecting INSTALLATION then Antenna setup Option. Then select ur Satellite.. My dish setup are like this Satellite: ECHO 6,8(110) Lnb type-Standard Lo freq-11250 22khz-OFF DiseqC-#2 Skew: O TP: leave it as is Positioner-Disable.
Satellite: ECHO 3ku (61.5) Lnb type-Standard Lo freq-11250 22khz-OFF DiseqC-#2 Skew: O TP: leave it as is Positioner-Disable.
Check the signal and Quality level highest as you can (adjust the dish slightly to improve the signal strength). If you get no quality level on transponders, try others before giving up, because not all TPs are transmitting, if nesscery Re-aim your dish still not getting any quality signal
6. Press the Exit button, press OK to save setting, the back to the Main Menu
7. Go back to the Installation Menu
8. Goto SATELLITE SCAN or BLIND SCAN, press OK, select the satellite to scan. you have to scan all the satellites have, once it complete, you should be able to watching Tv