Factory reset

 

Bronze Member
Username: Babakhan

Post Number: 42
Registered: Jan-06
Fta reciever>> i did a factory reset and i got 2 satellites,,one for 6.8 n 2nd for 3ku... then i did the installation of the "Antenna Setup"
selected 6.8 (110) Satellite:
Lnb type-Standard
Lo freq-11250
22khz-ON
DiseqC-#1
Skew: O
TP: left it as is
Positioner-Disable.

and for 3ku (61.5)Satellite:
Lnb type-Standard
Lo freq-11250
22khz-Off
DiseqC-#3
Skew: O
TP: left it as is
Positioner-Disable.
then did a Satellite scan for both singals...after scanning is done only one singal come 8.6(110) even on 3ku (61.5)..i am getting 8.6 channels,same channels, If anyone know wut i need to do to get both singals work,,, plz help me Thanks.
 

Anonymous
 
Sounds like you have only one dish and lnb or you have the diseqc # set wrong.
 

Bronze Member
Username: Babakhan

Post Number: 43
Registered: Jan-06
hmm no i have 2 satellites,,both singals were coming lastnight but i was having some other problem, so did a factroy reset so now only getting one.
 

Anonymous
 
Try connecting only the lnb pointed at nimiq 3 and scan.Without the switch.
 

Anonymous
 
Correction
Try connecting only the lnb pointed at 61.5 and scan.Without the switch.
 

Bronze Member
Username: Babakhan

Post Number: 44
Registered: Jan-06
ok Anonymous i am going to try that ty
 

Bronze Member
Username: Babakhan

Post Number: 45
Registered: Jan-06
Now getting both singals but.. if i am watching something on 6.8(110) and then go to 3ku (61.5) screen turn into black and after 1 or 2 min pic come and sometime screen freeze also,,if anyone know plz help me Thanks.
 

Silver Member
Username: Lklives

Post Number: 661
Registered: Jan-06
U are using DN hardware cause U subscribe(sw21 switches amd who knows what LNB's)... and not FTA disque switches or hardware..U are mixing apples and oranges, and wonder why U have problems..also thought U were using Dish pro LNB's which require No switches!...U never give anyone the full complete detailed info they need and what your expectations are..
 

Anonymous
 
Looks like the newest bin is buggy.Actualy the last two.Get the same problem.When switching from Dick Knot to Veb get bad or scrambled channell on Veb.Have to switch off and on and it clears up.Not every time but enough to be anoying.
 

Bronze Member
Username: Babakhan

Post Number: 46
Registered: Jan-06
i am using 2 Multi Star Regular Lnbf with two Satellites.
Using 2 switches one for dishpro reciever one for Fortec...For Dishpro reciever "switch Sw21"...
For Fortec reciever 4 Port DiSEqc "2.0 Switch"
 

Bronze Member
Username: Lokoz

Post Number: 11
Registered: Feb-06
if i do a factory reset will nagra errase
 

Anonymous
 
NO!Factory reset does not erase the bin installed.Only all channells.And resets all satellite settings.
 

Bronze Member
Username: Babakhan

Post Number: 47
Registered: Jan-06
if anymore information u guys need plz ask me..need to fix this problem thanks.
 

Bronze Member
Username: Babakhan

Post Number: 48
Registered: Jan-06
bump
 

Anonymous
 
Hows your signal quality.??Not level but quality.Dont like the answers your getting??Beleive me the bin is buggy.Its doing the same to me.But if your quality is low then it may help to tweak your dish.Or maybe switch ports on the switch.
 

Bronze Member
Username: Babakhan

Post Number: 49
Registered: Jan-06
Level is 89
Quality is 90 to 96
 

Bronze Member
Username: Babakhan

Post Number: 53
Registered: Jan-06
bump
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us