a very newbie question, im sure someone' can help....
i setup my dish ( DP dual 110 & 119 with the Pansat 4x1 diseqc) but i only can get the echo7 to get quality, so i did a blind scan and get all the channels but when i press the "SAT" button on the remote and select the 'Echo7' and after i select the Echo7 bottom of the list its say " NagraVision echostar 110W" i know Echo7 is not for 110w, does that mean im getting the wrong echostar agle?
Satellite: ECHO 7(119) Lnb type-DishPro Lo freq-11250 22khz-OFF DiseqC-#1 Skew: O TP: 1 Positioner-Disable.
Satellite: ECHO 8.6(110) Lnb type-DishPro Lo freq-11250 22khz-OFF DiseqC-#2 Skew: O TP: 2 Positioner-Disable.
i've been trying to get both 110/119 to have quality at the same time but it seem like its impossible. i even move the dish to the other corner of the house to make sure nothing was blocking the dish.
someone plz help. thanks.
pepe smith
Unregistered guest
Posted on
no need to set ur lnb type as dish pro make it standard and dont use disecq just put ur line on 119 or 110 side