Satellite Scan never completes

Raj New member Username: Raj909 Post Number: 4 Registered: Dec-05	Posted on Sunday, December 25, 2005 - 13:25 GMT I have a Pansat 2700A with 1 DirectTV dish set up for 61.5 and 1 Dish500 Dual LNB dish set up for 110/119. Satellite scan completes for 61.5 but never completes for 110 & 119. Keeps looping and stuck on 12xxx and percentage complete doesn't move. Both dishes are connected to a Coolst 4x1 switch. I have set to Factory Setting and still no luck. Thanks Here is my setup: 61.5 echo 3/ku LNB Local-Freq = 11250 DiseqC = 1 Level = 79 Quality = 99 110 echo 8.6/ku LNB Local-Freq = 11250 DiseqC = 2 Level = 79 Quality = 99 119 echo 7/ku LNB Local-Freq = 11250 DiseqC = 3 Level = 79 Quality = 99
Colin Silver Member Username: Hamtec Post Number: 347 Registered: Jun-04	Posted on Sunday, December 25, 2005 - 19:06 GMT do not set factory settings that will not help you.... Load bin and set default keys let it auto roll and all is good!!!!!
No1b4us Unregistered guest	Posted on Monday, December 26, 2005 - 02:05 GMT Run scan on each satellite separately, then hook up switch. This is why.
No1b4us Unregistered guest	Posted on Monday, December 26, 2005 - 02:06 GMT Run scan on each satellite separately, then hook up switch. This is why.
No1b4us Unregistered guest	Posted on Monday, December 26, 2005 - 02:09 GMT Run scan on each satellite separately, then hook up switch. This is why.
Raj New member Username: Raj909 Post Number: 5 Registered: Dec-05	Posted on Tuesday, December 27, 2005 - 01:53 GMT Thanks No1b4us, that did the trick! Much thanks.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us