Wondering if entering the keys using hex editor into the previous bin file(overwriting previous keys) and loading into my reciever will work. will it? I don't want to blow up my reciever.
i've never done that and would not even know where to begin but i do remember reading that you need to do a checksum if you change the keys in a bin file.
i hope that makes sense to you because it doesnt to me.
hamster????? i loaded the new keys where i loaded them last time in the bottom rows #88 and #89is this correct.or do they need to go somewhere else??????????
hamster????? i loaded the new keys where i loaded them last time in the bottom rows #88 and #89is this correct.or do they need to go somewhere else??????????
do i have to put it on nagravision 1 or 2? could anyone help me
nhung
Unregistered guest
Posted on
I have a 2500A and just put the following keys in but still not working. I think these keys are for 2700. Anyone w/ Pansat 2500a and got their unit up and going again?
Key 0: AF 0C BD 48 D8 51 6D DC Key 1: FE 44 D6 0C A3 6E 59 42
jcdmc
Unregistered guest
Posted on
hey it could sound stupid but i really dont know where to put key 1 and key 2
Key 0: AF 0C BD 48 D8 51 6D DC FE 44 D6 0C A3 6E 59 42
do i have to put it on nagravision 1 or 2? could anyone help me i have a 2500a clone
Mistyxxxx123
Unregistered guest
Posted on
i have the fortec ultra it allows me to enter "key Number" 00 or 01 then "Key" which I guess is where I would enter af 0c....ect. So what do I use Key 0 or key 1 whats the difference????
PANSAT 2500-UNDER NAGRAVISION, SCROLL RIGHT TO DISHNETWORK (SHOULD BE 2 TIMES, OR YOU NEED TO BE UPDATED!), THEN GO DOWN 1 TO KEY #, RIGHT 2 TIMES TO NAGRAVISION 2, ENTER THIS KEY: Key 00: AF 0C BD 48 D8 51 6D DC THEN HIT OK TO STORE, UP TO KEY #, RIGHT 1, ENTER THIS KEY: Key 01: FE 44 D6 0C A3 6E 59 42 HIT OK TO STORE, EXIT EXIT EXIT EXIT HAPPY HOLIDAYS EVERYONE!
Anonymous
Posted on
can someone tell me how to change the keys in a cooltec
well my problem is that i dont know if its 2500 or 2700, how do i know that??
southwestern
Unregistered guest
Posted on
Any thoughts? I have a Pansat 2700a. Was on for 110 and 119. Daughter got ahold of remote and channels reduced to 50. No PPV or Sports. Very cruel daughter .... all Christmas presents have been returned.
fortec lifetime ultra is the same instructions as this post:
PANSAT 2500-UNDER NAGRAVISION, SCROLL RIGHT TO DISHNETWORK (SHOULD BE 2 TIMES, OR YOU NEED TO BE UPDATED!), THEN GO DOWN 1 TO KEY #, RIGHT 2 TIMES TO NAGRAVISION 2, ENTER THIS KEY: Key 00: AF 0C BD 48 D8 51 6D DC THEN HIT OK TO STORE, UP TO KEY #, RIGHT 1, ENTER THIS KEY: Key 01: FE 44 D6 0C A3 6E 59 42 HIT OK TO STORE, EXIT EXIT EXIT EXIT HAPPY HOLIDAYS EVERYONE! :-)
at the top of the screen it will say "nagravision-2" and "dish network" when you are entering the keys. if it does not say that you are not entering the keys in the right place.
when you change the "key number" field by going right it will change from "Nagra-1 00" to "Nagra-1 01" then "Nagra-2 00" then "Nagra-2 01"
nhung
Unregistered guest
Posted on
I have pansat 2500 - N1, tried these keys and still not getting anything. Help? AF 0C BD 48 D8 51 6D DC FE 44 D6 0C A3 6E 59 42
santa
Unregistered guest
Posted on
How To Update your Keys for all FTA (c&p)
Here Are Simple Step By Step Instructions For Updating The Keys For Your Stb: ================================================== Suggestion Courtesy Of Bandit13: How To Manually Enter Keys For Pansats: ------------------------------------------------ Menu button select Parental Controls 2nd PIN/enter 0000 Nagravision Select ~~~~~~~~~~~ ( top right, use R / L Arrow Buttons ) scroll down select key 0 scroll down enter ( new key ) ( The letter keys are shown on the screen by function key ). Check it carefully. scroll up select key 1 scroll down enter Keys ( Same letter keys as above - bottom of screen ) check it carefully. Hit and hold OK until it flashes ( red, bottom right ) on the screen. exit out and watch TV ..
Suggestion Courtesy Of Wtm: For Those Using The Pansat To Fortec Bins ============================ Menu Right side volume button to channel edit down to codes 1668 or 1010 down to nagravision right side volume button to DN same as pansat except A-Sat B-Info C-Tv / Radio D-Upper Pause E-Audio F-Epg
Suggestion Courtesy Of Frankott: How To Manually Enter Keys For Lifetime Ultras: ------------------------------------------------------- Click Menu on the remote Then side arrow to Channel Edit Then down to Code then Ok then 1668 or 1010 Then side arrow to turn code Off just to be safe Then down to Nagravision then OK Then side arrow to Dish Network You need to change the keys on two lines. In Provider Id it will be 00 // 01 Then down arrow to Key Number & Make change Then down arrow again to Key number & make change Then Hit Ok to save. Then Exit once Then side arrow once, then 1668 to turn code back ON Make sure your Key Code Function is On Your TV should work now after you exit out
letter Codes ======== A - Sat B - Info or I C - Tv / Radio D - Pause E - Audio or ? F - Guide or Epg
How To Set The Default Keys: =================== Click on Menu , then go to Channel Edit , then Code , then Ok put in 1010 or 1668 then the down arrow to Set Default Key and click OK then exit out.
Suggestion Courtesy Of Dipper: How To Manually Enter Keys For Coolsats: ------------------------------------------------- Go to Channel 8282
Use the right arrow to scroll to 111 Nagravision ( Dish Network )
Enter the keys . Use the Info button for letters A-F . Press it once for A , twice for B , Etc .
Exit Out & Save Changes & Watch TV
Suggestion Courtesy Of Bandit13: How To Manually Enter Keys For Viewsats: -------------------------------------------------- Press Menu Button Installation Selection ( #3 ) Code Selection ( #7 ) Nagra Selection ( #3 ) Dish Network Always Leave The First Set Of Digits Alone ( 00 = First Row // 01 = Second Row ) There Should Only Be 8 Rows To Change For Active key If Needed ( A Total Of 16 Digits ) Change Keys If Neccesary On Active Key Or Where Necessary Press Exit And Press Ok To Save Changes Press Exit Button To Completely Exit Out Of Menu Options To Watch Tv .
Suggestion Courtesy Of Yono: How To Manually Enter Keys For Ariza: --------------------------------------------- Press 1- Green button 2- Red button 3- Red button 4- Menu button 5- Press right arrow several times until you see nagravision 6- Now depend on the key that changed and it is active you must scroll down til proper key to be changed Example: On 06/09/05 ECM key 01 is active. Scroll down to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter follow code definition button on your TV screen) 7- Press OK for 5 seconds. 8- Exit,exit........... 9- Enjoy
DN active provider in ariza flash is 0101. so edit keys in 000101 lines DN key 00 is in 3rd line from top to botton Key 01 is in 4th line
Suggestion Courtesy Of Yono: How To Manually Enter Keys For Digiwave: ------------------------------------------------- 1- Press MENU 2- Scroll down to System Setting. 3- Press OK. If you see a red dot in the botton/left of your screen, go to step 5 4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins. 5- Press red button (audio). 6- Press right arrow until NAGRA appears in the first line. 7- Down arrow up to Provider and right arrow up to 0001. 8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00. Get keys from Maestra or another site or using a key grabber program 9-Scroll down to second key line, press ok. and enter key 01 10- Scroll To Save Key and 11- Press OK. 12- Exit and Enjoy
------- i hope this will help
needhelpbad2
Unregistered guest
Posted on
mine only says nagravision on the fortec no choice for nagra 2?
nhung
Unregistered guest
Posted on
Sorry for my stupid question - my Pansat 2500 is back and going. I forgot about checking to make sure I'm changing the N2. Thanks!
still need help
Unregistered guest
Posted on
this info is great but how do I know if its 00 or 01 and which of these codes do I use AF 0C BD 48 D8 51 6D DC FE 44 D6 0C A3 6E 59 42 neither seem to work on my ulta
i dont have a choice of nagravision 2 how do i get it????
bob1769
Unregistered guest
Posted on
can someone please tell me the the new key for coolset 4000:
which line does it belong???
thanks
jamester
Unregistered guest
Posted on
same just like someone jam i don't have the option for nagravison 2 on my pansat 3000 clone
SATWIZ
Unregistered guest
Posted on
PANSAT- IF YOU ARE AT NAGRAVISION, ENTER- THEN GO 2 TO THE RIGHT, YOU SHOULD SEE DISH NETWORK. BRING CURSOR DOWN 1 TO KEY NUMBER, SHOULD READ 00 AND THE TOP LEFT OF SCREEN SAYS NAGRAVISION-1, HIT THE RIGHT ARROW KEY 2 TIMES, SHOULD SEE 01, THEN 00 AGAIN SHOWING NAGRAVISION-2...ENTER YOUR CODES. IF YOU CANT LOCATE THIS AREA, YOU NEED TO FIND AND DOWNLOAD THE LATEST PROGRAM. CHEERS!
Satwiz whats the latest program cuz when i go 2 to the right it isnt dishh network.when i continiue,i find it but still no nagravision even by going on key number and doing right 2 times :/
scratch that satwiz forgot it was for pansat. I need for fortec ultra lifetime.If u know I would still appreciate it.tx.
frustrated one
Unregistered guest
Posted on
why is this such a game? Satwiz had it right with the instructions if only an example was given with keys. I tried entering the info on the ultralifetime and it still does not work. I don't understand why there is always two lines of code given when the receiver only has and area for one line and also I can only enter 00 or 01 in the line for the key?? Why is this such a god dam game....
frustrated one
Unregistered guest
Posted on
why is this such a game? Satwiz had it right with the instructions if only an example was given with keys. I tried entering the info on the ultralifetime and it still does not work. I don't understand why there is always two lines of code given when the receiver only has and area for one line and also I can only enter 00 or 01 in the line for the key?? Why is this such a god dam game....
Hey Guys Help me out i did the stupid thing changed the top 2 set of keys & chaned the 2 nd set 2 & saved it can u help me to the next 2 sets after these 2 active keys pls pls AF 0C BD 48 D8 51 6D DC FE 44 D6 0C A3 6E 59 42
babystarbwoy
Unregistered guest
Posted on
can anyone tell me what the codes are for fortec star there is only one line for the codes, can someone give me the codes for it please
Hello Guys, Well i just need a little help with the DISH NETWORK thing. I have a DG 7200 reciever ( Naigra 2 type). Please if any anybody could give me the keys for that. Please if someone could help me asap.
i have a pantec ultra and can't get anything to work. Light goes back and forth on recever and thats it can't turn on. Any help would be appreciated. Thanks
Here are a few tips if you are having difficulty flashing:
I would advise everyone to read a set up guide before flashing. But, since people have been having some problems, I have revised this to provide more detailed information. But this is not intended to be a substitute.
1. Make sure you use the proper serial cable for your receiver: Fortec and Pansat use a straight through cable with DB9 females on both ends. The Blackbird uses null (crossover) cable, which crosses over pins 2 and 3.
2, With the power turned off, connect it to your computer and receiver using the serial connector. Use serial port # 1, if you can.
3. If you do not have a working serial port, you must install one or use a computer that has one.
4. Use the appropriate loader.
5. Select the file. Make sure that it is the correct flash for your receiver.
6. Select the COM port your receiver is connected to. If you do not know, what it is try #1 first.
7. Enter the correct model name and number.
8. Check off the correct function box. Your choices are boot, flash or channel list. To FLASH your receiver you would use FLASH. Most flashes do not require a separate boot; so do not load both separately.
9. Turn on the receiver power from the back switch.
10. As soon as you see the lights flash,very first light -- IMMEDIATELY press download.
What do you think you are doing mr. The way i see it mr. Thill 1951 is being helping others, Why the bashing and vulgar remarks towards him and other? You serve this sight nothing but your vulgar remarks towards him and others. Its time for you to go from this sight. Ecoustics when are you going to STOP people posting this crap. Is this not a dss sight for INFO? Then stop the vulgar posting and only let those that are posting useful info only post. You are the people that can clean up this sight. Hope you are going to come the new years or i will be gone from here. Mr.thill 1951 I have being wrong about you and Iam sorry. I known now its isn't you making those vulgar remarks. Its someone using your nick and I didn't understand that. Sorry.
Anonymous
Posted on
It's about time you saw the light instead of following thill around with Maple to Bash him for posting!!! I thought you were maybe the fruitcake above with one of his many aliases.... The real thill aka LK is always welcome here as he is the biggest help at this site! The Fruitcake above you is a phsycopathic vulgar bsahing poster B1tch Boy aka John Ann, Depuity Dog he ha he ha ect...
Mr. Anonymous, first things first, I don't like it when someone post anonymous. Why don't they use a nick! Maybe they are hiding something, like who they are! Second, I did not follow Maple Leaf around, I was under the understanding that he was the head man of dss on this sight. And I did find him most helping to me and to others. Also Mr. Maple Leaf did not post any vulgar remarks towards me or others that I know of. Third, I have now come to the understand that it wasn't Thill 1951 making those other foul post, and for that iam willing to tell everyone that I was wrong about Mr. Thill 1951 and i apologize to him.(Mr. Thill 1951 iam sorry for blaming you for making dirt vulgar post and I didn't mean to offend you. I have only being on this sight for one and a half weeks now and this is all new to me and so is dss. I come from Toronto canada and I get a lifetime ultra receiver for 130.00 dollars can tax and all. And the man I got the receiver from came to my house and installed the receiver for me dish and all for another 100.00 dollars and gave me the address to this sight to keep my receiver working. So far so go. Just think of this for 230.00 dollars i have free tv and in my books thats a good deal. Finally I want to thank you all for your help, and i wish you and your family a very very marry christmas. And God bless you all and also all the troops in the middle east serving their country. God bless America.
LK's Buddy
Unregistered guest
Posted on
@ to-much-4-you
Thill also wishes you a Merry Christmas
Anonymous
Posted on
Username: Tomuch4you aka kneegs Full Name: to-much-4-you Last Logged In: December 23, 2005 Registered: December 15, 2005 Total Posts: 55 Status: Bronze Member Occupation: grave digger City: new york Country: usa Age: 50 Sex (M/F): f
I don't care what you say mr the hitch I have just finished looking through the archives and let me tell you something mr, you have a foul dirty mouth on you, and you talk about kneegs, b*tchboy and others. I made a mistake about Thill 1951 but about you I have not made a error at all. Someone need to wash your mouth out with soap. I don't need or want to talk with you on any thread because you serve this sight nothing but vulgar remarks towards others. You must be one of them people that you are talking about! And you ain't fooling me. Good bye!
Anonymous
Posted on
To Much 4 you: First things first, this isn't your site you share it with the rest of us. You didn't ask me if it were ok to use T4 as your nick and what name I use is my business, keeps people from stealing your nick as they have (LK) who has now had too switch his nick to thill and someone stold that and had you fooled didn't they? I have been registered here for 10 months, so who are you to come here bringing nothing and opening your mouth and inserting your foot!!!Take care, someone might steal your nick and use it to post obscenities!!!
Second, you're right you didn't follow Maple around, you both followed the real thill around to bash him into leaving. If you're not part of the solution, your part of the problem! And how you learned anything from Maple is beyond me as he didn't post any usefull info in his posts that was DSS related.
And third, it's nice that you have finally realised you were wrong about thill aka (LK) and have apologized to him...If you came here to learn maybe you should have read more and posted less, you can't listen when you're too busy talking about something you know nothing about!
First of all, like I said in the past, I don't like to talk anyone who can't post with their name or a nick! Did your mother, if you had one give you a name or did she call you anonymous? Second You must be apart of the problum not me or Maple Leaf. Anyone can know the post we make, in case you have not notice we use a nick in all our post and it doesn't read anonymous. And no one can steal your nick if you are registered Who do you think you are fooling with. What a bunch of lies. Thats why you are using the name anonymous, because you are a troublemaker yourself and you want to blame me and others. I have not made anykind of post using vulgar remarks towards others, but people like you that use the name anonymous have made 75% of the vulgar remarks. So Iam looking a you mr! Third I have apologized to Thill 1951 not you, so go and mind your own business. Finally I not going to make a post to anyone from now on that is using the nick ANONYMOUS. And I ask everyone that is using this sight not to post to anyone who is not registered and don't use a nick. This will stop all the vulgar posting and remarks towards others. And everyone that is using this sight will know WHO IS WHO.
Anonymous
Posted on
First off you've been here a week and a half and you act like you own the place!!! And yes some one can steal your Nick Moron, some one stold thills and you bashed him telling him he was a Nam commy and to stick it, we don't need your advice around here, go away!!! You came here to learn and all I see from your posts is venting, just like a female!!! Yes I can click on your bio and find out how many posts occupation ect....and you can't on mine and it pisses you off and everyone like you! And now your asking everyone to not answer any one with the name Anonymous, what have we here another phoney leader like Maple leaf??? And you don't bash eh??? Did I have a mother??? and if so did she name me anoymous??? Leave my Mother out of this!!! I don't post vulgar remarks, but I will call you if your dishing out feces and you surely are!!! Get this I'm registered here otherwise it would say unregistered guest, Got It, you don't even understand that do you? Also Get this because I've been here for 10 months I know and recognise most peoples writing style and You don't!!! I have been following and calling those that have been maliously bashing the real thill that was LK when I arrived and some one stold his Nick, then he became thill and his nick was stold again!!! So to answer your question who do I think I'm talking to? no one can steal your nick......Get a grip you came here to learn or so you say, your a gravedigger alright because you've burried yourself here already by bashing the best guy at the sight!!! Now your bashing one of thills so called chimps!
I'm begining to think your a Moron, you just don't get it do you??? Perhaps you've a reading comprehension problem....By the way if my English serves me right this is how you properly spell your nick Too-much-for-you.
Anonymous
Posted on
PS too-much-for-you
Learn to proof read your posts as well!!! apart of the problum? A part of the problem.
You've brought nothing here, but your attitude. And your buddy Maple Leaf, where has he been lately now you know the truth about thill??? And why was leaf bashing thill anyway, maple has been here long enough too know better! If I catch you or Leaf bashing thill (aka LK) your getting jumped on, if you don't like that you're free to leave.
does anyone have the keys for pansat 2300a?...plzzzzz help
Anonymous
Posted on
Too-much-4-you or is it 2-much-4-U now??? Two words for you also "get literate" before you post any more! Otherwise you're just passing wind!
occupation: Grave digger Lives in New York? You said your from Toronto, Canada???
Only part beleivable about your nick is your a female...your ranting proves,it woman. Opinons are like butts everyone has ones, yours just happens to stink since you've arrived.
Now that's as vulgar as it gets and I hope you know where you can take it and hope you enjoy the trip!
You said your name was. Thill 1951 You said your name was. LK You said your name was The Hitch You said your name was anonymous You said your name was b1tchboy You said your name was kneegs You said your name was depuity dog You said your name was he-ha-he-ha-he-ha You said your name was ect, ect, ect, ect, ect
This is why you don't want to register an account Because you are a lying vulgar person. Take a trip to the moon
too much..I accept your apology,but I made it quite clear all along that I was not the troublemaker and vulgar.I also made it very clear that I had a registered imposter with same nick as me..It sure appeared to me that U didn't care what I advised U, AND U really were a part of the real troublemakers here (maple leaf,kneegrows, bitchboy,john-ann,etc.)...It took U a VERY long time to finally understand..and U did come in here as a total newbie and IMMEDIATELY and wrongfully start bashing the good old time regulars,when U were the new kid on the block and knew nobody here..Most people keep quiet and learn a new neighborhood before they go accusing people wrongfully..
The above poster anon is NOT anyone on your accusation list except possibly Hitch (surely not me or LK,as I am LK also)...Hitch is a good guy here and NOT a troublemaker..also any registered person can use anon as the nick,so being registered means NOTHING here..I posted here for 2-3 years as an unregistered but I was LK until someone stole that and registered it just so I couldn't use it..now someone stole my REGISTERED nick and has almost copied it (except for the 'gold member)...so anyone who posts as anon IS registered here..and when registered U can still use your true registered nick, make up any unregistered nick, or use anon with every new post U write.....I believe the person is using the nick anonymous because U have already wrongfully accused/opinionated his known registered nick as being trouble, so he is just trying to get U to really understand and comprehend what he is telling U..he, anon is 100% coorect in what he has said..U have the wrong opinions of all the wrong people and are a newbie here who should tame it until U really know who the people are here..
example-U praised maple leaf who hasn't helped anybody here and is never around when keys change and people need help...U bashed me 55 posts,and wrongfully accused me with incorrect statements about me...I am a good guy here,not bashing people or ever swearing, but heping mostly..
RRam123
Unregistered guest
Posted on
Hi, ok, I'm stupid. I just got this cool sat box and it was already ready, set and watch, but i was fooling around with it and trying to figure some stuff out and getting to know the box features. And, well i reset the box back to the factory settings. Now, Some of the things are missing. I only have Nagravision, i don't see 2. Is there anyway to update the software on this box. Everything else is correct, the keys and id #s. If someone knows how to help i would appreciate it
Just load the latest bin to it, then U'll have N2 and the ability to edit keys..
Manual-setup.. [link removed]
latest file.. [link removed]
[link removed]
[link removed]
[link removed]
Anonymous
Posted on
thill (aka) LK
Thanks pal for returning the favor of covering my 6 o clock on this one! You're right this is not B1tch Boy, he waited untill after your post before he jumped in! He's sick, but not totally stupid, just ignorant. This is the kind of crap he wants in here; everyone at each others throats and blamming the other!!! He has No writing abilities and has become easy for me to detect, at a glance!!! But then again they do say most people only understand less than half of what they read.
I didn't post on Chistmas as I had family over for dinner ect, I've got a life and better things to do. I see too-much-4-you did though, she loves this and really is convinced she's lashing out at B1tch Boy and the list of others. She is "too much" alright, let's leave it at that, I think we know the rest! Conveinced herself she's on a witch hunt and going to burn someone at the stake and clean this site up!!!She still doesn't understand I'm registered or it would say un-registered guest under anonyomous.
I learned a long time ago at this site after 5 posts showing my nick, not a good thing unless you want the sick one(s) in here post as you and or be at the brunt end of their post!!! Too many Anon's in here for them to stalk and He/they know it!!! Takes all the glory out of bashing when they/he can't stalk you in particularly. There is after all a bit of psychology when dealing with this type of parasite that too-much-4-you has yet to learn.
Anyway I only visit to help a friend out who bought my old Pansat2500 I have a C00lsat now and have only been down for two days in the past 10 months. I only visit here to reveiw and help my friend who bought my Pansat, seems the ultima's, pantech, Pansat and other lower end units give the most grief!
In closing thanks again thill for hanging in there, you truely do have more patience than I dealing with all the stupidity at this forum! In fact I post very little, usually one or two lines of helpfull info or refer to a site with the answer! And No I'm not Hitch either....I'm a 48 yr. old disabled Veteran who was an aircraft mech. for 20 yrs. and that's enough said about myself!
Regards, Happy New Year!!! RC
Anonymous
Posted on
Can someone help me please. I can't change the nagavision to 2 from 1. It always stocked on nagavision 1 and not changing. Someone pleazzzzzzzzzzz help.
I have a Pansat 2500A...........my codes are inputted properly and match those which Hamster has supplied. I receive all of the movie channels that I did before the code changes........but for some reason I don't recieve any of the fox sports or espn channels. I run off of both 7.0 and 8.6. Anyone else share this problem.........or by chance have an insight as to a solution for me? Thanks in advance
BLHATER
Unregistered guest
Posted on
IF ITS NOT BROKE JUST DOWNLOAD A BLACK LIST BIN TO IT AND THERE YOU GO ALL BROKE ILMAO
nellyferry
Unregistered guest
Posted on
anyone have new keys for ariza 700
Daal bhaat
Unregistered guest
Posted on
I am using the keys Hamster posted on my Lifetime Ultra, but i am only getting 6 indian channels and not the 12 i should be getting. Does anyone else have this problem? Are there any other codes i can try?
Anonymous
Posted on
anyone have new keys for pansat 2700A
Anonymous
Posted on
Can you use the pansat 2700A keys on the MegasatPro If not where can I get the Megasatpro keys and Bin files
yeh! I did..but my tv until now black and white!, ok-- sorry I am just newer-- I just got this reciever only one& two week.. I still need help..don't you got it! Iam still looking for a software for my receiver pansat 2500a.. if you think you can help me..iam very appreciate!
Hey Guys, I'm desperately seeking for help...I have a Fortec Star Lifetime Ultra receiver, and I lost all the PPV and Sports Channels like ESPN on January 17th. I have the Fortec Updater in my PC...I just need to know what is the BIN that I need to enter in order to flash my receiver, or where I can find it... Please help me guys...I got this receiver last September and it is the first time for me to use this program myself...Please help me out...I'll be very thankful!!!
Anonymous
Posted on
i have a fortac box and i lost everything as of 01/17/06 will someone walk me through what i hve too do to.
Help!! I just purchased a sat 5000 platinum and do not know how to input the key codes or where to find them.. I'm new to this. any help would apreciated.
Anonymous
Posted on
Can anyone tell me how to get to the place where you insert the new key bin? Im using a fortecstar lifetime ultra satelitte reciever.
Fortecs have no n2 code area. You can, however flash with 256t which is a pansat bin, then you can manually enter the n2 keys. if you don't want to do that, you'll have to wait for the new bin made for the fortec with the n2 keys already incorporated in the bin. If you do flash to the 256t pansat bin, it become in essence a pansat. Do not however assume that you can now use pansat bins!!! YOU WILL KILL YUOR FORTEC!!!. you must leave it as 256t or fortec bins only!
Anonymous
Posted on
Does anyone have the same problem as I do. My viewsat has the right keys but half of channels you can't see on Dishnet.
Hey there KZ, Can you explain to me how to do that to my viewsat, I am aiming to 110, and 119.
thanks a million
Anonymous
Posted on
I have a SatnSound 6600IR . I need help to open up 3 channels on ABS-CBN for testing. Will some one give me some ideas . Also will some of the codes I got work? ABS CBN N 6E01 00 E61BC76895D5618F ;ABS-CBN 5i½W/75i½E key update: 13/12/2004 N 6E01 01 7109CF8603C42C65 ;ABS-CBN 5i½W/75i½E key update: 21/12/2004 N 6F01 00 E61BC76895D5618F ;ABS-CBN 5i½W/75i½E key update: 13/12/2004 N 6F01 01 7109CF8603C42C65 ;ABS-CBN 5i½W/75i½E key update: 28/11/2004
