Entering Keys on Viewsat2000

 

FTATOM
Unregistered guest
How do you enter the new keys for b3v on the vs2000?
 

Bronze Member
Username: Johnydepp

Post Number: 27
Registered: Nov-05
Press Menu and then press installation and you will see CODE button on the bottom of list. That's where you enter your codes replacing your old ones
 

dssjunkie
Unregistered guest
Enter them on 08 ,09 line.You will also have option 08 01 00 or 09 01 00.Choose 09 then exit and watch tv.
 

Silver Member
Username: Thill1951akalk

Post Number: 942
Registered: Oct-05
Go to Menu, Installation,Code

then pick Nagra, then left key One Time and it'll show Dish or Dishnetwork and you'll have something like

00
08
09
88
98

Only change the key on 08 and 09

08... F2 98 74 44 1C 65 77 D8

09... 17 E3 E1 1D 89 4E 53 45

after you are done, exit and save
watch TV



--------------------------------------------------------------------------------

How To Manually Enter Keys For Viewsats:
--------------------------------------------------
Press Menu Button
Installation Selection ( #3 )
Code Selection ( #7 )
Nagra Selection ( #3 )
Dish Network
Always Leave The First Set Of Digits Alone ( 00 = First Row // 01 = Second Row )
There Should Only Be 8 Rows To Change For Active key If Needed ( A Total Of 16 Digits )
Change Keys If Neccesary On Active Key Or Where Necessary
Press Exit And Press Ok To Save Changes
Press Exit Button To Completely Exit Out Of Menu Options To Watch Tv .
_________________


 

Unregistered guest
I HAVE SIGNAL BUT NO PICTURE OR SOUND IS COMING IN. WHAT SHOULD I DO?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us