I am trying to flash an ARIZA 700 for a friend.. I havent used this kind of reciever before.. Anyone know where to get a working loader and recent bin for it.. much appreciated..
This is loader and N2 bin for new Ariza 700- 750. was posted by mod at another site. I read you need to do this when setting it up. in Menu go to Parent menu . press i2004, then OK - you'll get completely new window. in there go to the key emulation. Make it ON.
How To Manually Enter N2 Keys For Ariza: Press 1- Green button 2- Red button 3- Red button 4- Menu button 5- Press right arrow several times until you see nagravision 6- Now depend on the key that changed and it is active you must scroll down til proper key to be changed Example: On 06/09/05 ECM key 01 is active. Scroll down to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter follow code definition button on your TV screen) 7- Press OK for 5 seconds. 8- Exit,exit........... _________________ --------------------------------------------------------------------------------
How To Change Keys Ariza 700
1) Press Menu
2) Scroll Down to Parental Control, Press Enter
3) Press "i" key on remote, then enter pin number "2004"
4) Scroll down to Set Default Key, Press Enter
5) Scroll up to Nagravision, Press Enter
6) Press VOL Right twice, you will see Dish Network
7) Press CH Down once, then VOL Right Twice, you will now see Nagravision 2 displayed top left
You are now at the key 00, Press CH Down once so you can edit the Key Data
9) Enter your new keys (write down the old ones to be safe)
10) Press Ok to store, then repeat with key 01
11) Press exit until you get back to tv, all channels will be available
1...wrong or defective flash cable 2...wrong or defective serial port on puter..
The Guides attached above and links will walk U thru it all...and any previous reading by U would have told U what causes the "flash failed" message....so I suggest U start READING...I SPOON FED U everything U need!
OK.. I flashed the ariza.. when i go to antenna set up i only get a level of 32 % and no quality.. I figureed it might be the flash.. so i flashed it with 3 different flashes, with no success... is anyone familiar with the ariza 700 at all?
Thats why I linked U above...they discuss and have the manual for your receiver...even U said it "its not very popular"...but U will get help and answers from my links
BTW...sounds like U don't have your dish aligned correctly....need 70% or more..
ftafiles
Unregistered guest
Posted on
i download the new bin for ariza700 and used nagra2 new keys and still have scrambled or bad channel , ido not know whate,s the problem do i need to but something else,help please.
Betito
Unregistered guest
Posted on
alot of people are having the same problem http://www.curious-contraptions.com/forums/forumdisplay.php?f=126
my dish is aligned correctly thill ... when my fortec is hooked up its fine... thats what i use... but just no quality coming through on tha ariza and a low level as well argh.. and i did find your links above useful.. just isnt helping for what i need now..