|
Bronze Member Username: KlemperPost Number: 67 Registered: Sep-05 | Is there new key for this, and if so is that what i need to change to get up again. Where do i find the new keys, does anyone have them? thanks |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 516 Registered: Oct-05 | @Ryan Klemp Look for a new bin on any reputable dss site. |
|
Bronze Member Username: KlemperPost Number: 68 Registered: Sep-05 | Please refer me thanks. Plus i cannot get ftlink to pic up comm, any suggestions |
|
New member Username: DiselePortland, OR USA Post Number: 1 Registered: Nov-05 | Any boddy knows anything obotuh the resiver (ADTH Atlanta) is there anything I can do with any files for it, plese Help. thank you. |
|
Bronze Member Username: KlemperPost Number: 69 Registered: Sep-05 | Please ignore him and help me thanks. i connot get comm for some reason |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 519 Registered: Oct-05 | Here's the spoon: |
|
shivo_2 Unregistered guest | hi ! can anybody tell me how to put new keys in digiwave 7000 or 7200s.did u c how many digits there is in that line where keys are, i dont get it, what is what. please help thanks ! |
|
Silver Member Username: Thill1951akalkPost Number: 599 Registered: Oct-05 | READ for 2 minutes...then read my FREE TV'er's thread! |
|
Bronze Member Username: KlemperPost Number: 70 Registered: Sep-05 | When i use ftlink3.1, i cannot get it to pick up comm 1 or 2, Is the cable that came with my receiver any good or is it the wrong one? |
|
Silver Member Username: Thill1951akalkPost Number: 603 Registered: Oct-05 | Ryan...U do NOT read here...U will never get FREE TV again, IF U do NOT read! BTW..U don't say what receiver or cable U have...do U think the helpers here are mind readers too?...some people's children!...now go read and TEST...there are only 2 types of cables ...use the right one!..and if it is,then try another one...simple LOGIC that a 8 yr old would use!!! |
|
Bronze Member Username: KlemperPost Number: 71 Registered: Sep-05 | suck a dick fool, do not reply on my threads, if you are going to be a loser |
|
TOP Unregistered guest | RYAN-Silly Thilly-boy is right....ROTF....So fu@k off and go away before I flesh you down the toilet...Thanks Thilly-boy for not blowing your top....But you can blow my top....That is the top of my dick-eeeee-bird and work you way around the sides....ROTF |
|
Silver Member Username: Thill1951akalkPost Number: 604 Registered: Oct-05 | Ryan...U are the loser..I will never help U with your lazy immature cocky attitude..U better hope the other helpers here will SPOON FEED U and read your mind...they (other helpers) will learn once lazy ,always lazy and U will be always asking to be spoon fed! and if U're not in school,then U should be, cause U don't seem to be the brightest bulb or very articulate to hold down a decent JOB.. |
|
Bronze Member Username: KlemperPost Number: 72 Registered: Sep-05 | Flesh me down the toilet, good english. And thill is this all you do is sit at home sp@nking it with a thumb up your aZZ, replying to mt posts |
|
Bronze Member Username: ThehitchFla. Post Number: 67 Registered: Oct-05 | Ryan, woe be unto you when Knegs agrees with thill1951 it can mean only one of two things, the world is coming to an end OR, you are unequivocally, most assuredly,without a doubt, fahk`d on this site. Cya. |
|
Silver Member Username: SpankPost Number: 237 Registered: Oct-05 | No one should be helping this Klemp guy. He started a thread a couple weeks ago (that the mods quickly deleted) cursing Thill saying he liked little boys etc. So I asked him what was the point of doing this? He in return, started cursing me with juvenile crap also. He is a punk who doesn't deserve any help. |
|
RYAN good-bye Unregistered guest | Spanky FTA-You are right...I agree with you, he is a punk....We need to stick together...ROTF And leave mt brother Thilly alone bud, he is a good person....in the Lord....ROTF |
|
daddy_yankee Unregistered guest | Usa a Null Modem Cable kid , probably you are using a rs232c cable and that does NOT , I repeat , It does not work on DIGIWAVE 7000. Get a Null Modem cable ... next time dont pretend that people can read minds ... |
|
momoffour Unregistered guest | i used null modem cabel and i did the download for digiwave7000 and still did not work it says updating and black screen help please. |
|
Bronze Member Username: JdqPost Number: 99 Registered: Apr-05 | Then you are using wrong bin or havent got right keys |
|
momoffour Unregistered guest | any one knew the new bin for digiwave7000 i can not find it pleeeeeeeease some one tell me ,i tried all the bins i found nothing is working,please help |
|
Bronze Member Username: KlemperPost Number: 75 Registered: Sep-05 | Don;t ask here no one will help you, send me an email to rjklemp1@hotmail.com and i will give you the bin i am running, ok |
|
Silver Member Username: Thill1951akalkPost Number: 627 Registered: Oct-05 | [link removed] ...files area |