Fortec Users Read This.
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 437 Registered: Oct-05 | Here's a c&p from al7bar that might help you: "Lifetime Ultra NTSC. If you read and do all of this you will have less questions at the end. Use a STRAIGHT THROUGH CABLE RS232C hooked up to your receiver from the computer. Take the cable off going to the LNB. If you have the year model Dec 2004 or 2005 receiver then you may need to use a USB to Serial cable 26-183 at Radio Shack. Get detailed instructions here Download to your computer Blacklist STB UPDATER.ZIP It don't ask you as many questions. You can get it here UNZIP both files. You can use WinZip or Winace. You can get them here http://www.winzip.com/ http://www.winace.com/ Click on UPDATER.EXE to start it. Set the COM PORT and put a dot in BIN. Click on BROWES then put in Al7bar FTA Ultra 050926 282t api(NTSC).bin (note it is a bin) Turn receiver on from the back, when FIRST bar starts then click FIX on your computer. After you get compleat on the computer the ON will display in the receiver, then it will displays a channel number if you have channels in your receiver. Your receiver is flashed." |
|
New member Username: Coolie11Post Number: 3 Registered: Nov-05 | @h3lt3r_sk3lt3r I tried the links you listed above but they said page cannot be displayed |
|
New member Username: Reach_honeyPost Number: 4 Registered: Mar-05 | @h3lt3r_sk3lt3r I uploaded with loader all i get it Scambled or Bad signal. |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 439 Registered: Oct-05 | @coolie11 delete the space in between the site name and .com or .tk |
|
New member Username: Coolie11Post Number: 4 Registered: Nov-05 | @h3lt3r_sk3lt3r It's the same |
|
New member Username: Coolie11Post Number: 5 Registered: Nov-05 | @h3lt3r_sk3lt3r any surgestions? |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 443 Registered: Oct-05 | @coolie11 The al7bar servers are overloaded right now, that's why you get the time out error, keep trying. |
|
New member Username: Coolie11Post Number: 6 Registered: Nov-05 | @h3lt3r_sk3lt3r thnx |
|
New member Username: Coolie11Post Number: 7 Registered: Nov-05 | @h3lt3r_sk3lt3r Is it possible for you to e-mail me the files? |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 444 Registered: Oct-05 | @coolie11 Sorry dude I don't want my email (even if it's a dummy one) to be out in public. Just keep reloading the page, I just got through I'm sure you will too. |
|
cool hand luke Unregistered guest | again iam asking, i just got a lifetime ultra receiver. i have a bin file that says this. ultra-050926-282napi (ntsc) (11-7-05)-zip i have never done this before could someone tell me step by step what to do or print it out for me. |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 446 Registered: Oct-05 | @cool hand luke Why don't you read the very first post in this thread, if you still need help I'm sure Kneegrows might help. |
|
WHAT WE HAVE HERE IS FAILURE TO COMMUNICATE Unregistered guest | A Kne-grow (31-4 skins) told me you are the best for helping others out....How do I get my new lifetime Ultra receiver working using 050926-282 ben file...Could you print it out step by step for me.....This Silly Thilly punch woun't or can't do it because all they do is bash people and eat SPAM with chimp sh*it in it....Kne-grow I think they are all full of spam chimp sh*it and their eyes turned brown because they are full of SPAM Chimp sh*it and a quart low....(He-Ha-He-Ha) |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 453 Registered: Oct-05 | hahahahaha Kneegs can't get his POS fortec to work hahahahha damn Kneegs for someone hanging around DSS board you sure are one dumb psycho ba$tard, sorry I mean chimp banned douche bag hahahahahah |
|
MR CHIMP sh*it Unregistered guest | (31-4skins)-You are right....Iam only a chimp... I got a excuse, whats yours?...O I know, you have being eating to much SPAM with chimp sh*it in it....Thats why you are acting like us....Did you grow a tail yet...ROTF |
|
Silver Member Username: Thill1951akalkPost Number: 571 Registered: Oct-05 | The admins/mods here are the troublemakers...after last night,can't U see that!...the admins/mods were not here helping...and neither were the troublemakers!...they are one and the same people! |
|
Anonymous | h3lt3r_sk3lt3r YOu............. ARE Awesome!!!!!!!!!!!!!!!!! |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 459 Registered: Oct-05 | Yes kneegs and it's a fine one too, I turn channels with it, even enter new keys hahahahahah tooo bad your as$ got baaaanned hahahahaha |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 461 Registered: Oct-05 | @Anonymous Uuuuhhh you're welcome......?  |
|
New member Username: PatchesPost Number: 3 Registered: Jun-05 | can someone just email me the fortec files (zipped) since I can't download them anywhere...all sites are busy.. patchkoho2@aol.com thanks |
|
New member Username: WhatzzzupppMontreal, Quebec Canada Post Number: 8 Registered: Nov-05 | thnxxxxxxxxxxxxxxxxxxx any way am try 2 figure it out cause i have no idea what u wrote to be honest with u mrrrrrrrrrrrrrrr h3it3r-sk3it3r |
|
stop pulling my leg Unregistered guest | WHERE IS THE BLACK LIST UPLOADER!!!!!!!!! WHAT A BUNCH OF CRAP, NO BLACK LIST! |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 483 Registered: Oct-05 | @stop pulling my leg Why don't you calm down first, and not blame others just because you are TOO LAZY to look. Go to this thread and look at Spanky's post: https://www.ecoustics.com/electronics/forum/home-video/173780.html |
|
coldgirl Unregistered guest | I tried your fix above and it says write failed. I have used blacklist stb updater v3.21 and fortecstar stb updater v3.21 (flash update failed) your 282 fix and 276 fix. any other suggestions? |
|
Bronze Member Username: PrfrmnjPost Number: 24 Registered: Oct-05 | Coldgirl - What operating system do you have on your PC? If it's WIN2K it won't work. You need either ME or XP to flash. |
|
coldgirl Unregistered guest | Just downloaded windows XP Professional yesterday before I started all this. Tried before with Windows 98SE and it didn't work. The port setting should be at 115200, which I changed on the device manager. But when I go to system information and to the port setting the Baud rate for com1 is on 9600. Could this be my problem? |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 488 Registered: Oct-05 | @coldgirl Don't change any settings the bits per second in com1 properties in device manager should be 9600, you might however try switching to a different com port in the loader, also try shutting down any antivirus or firewalls running on your pc. And are you sure you have the right cable? it should be straight-through for fortec ultra. |
|
Bronze Member Username: PrfrmnjPost Number: 25 Registered: Oct-05 | coldgirl - If you are using the Blacklist Loader, you do not need to change anything and as far as the baud rate on your pc is set by the device manager so that's not the problem. I agree with h3lt3r, sounds like a cable problem. |
|
New member Username: KonfusedPost Number: 9 Registered: Aug-05 | so what is the scoop with firtec ultra is anything working or not? |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 504 Registered: Oct-05 | @Kon Fused everything is up and running. |
|
New member Username: KonfusedPost Number: 10 Registered: Aug-05 | huh! thanks h3lt.. will try in the evening n let everyone know keeping fingers crossed! |
|
south asian boy Unregistered guest | hey guyz i need to know how to flash a bin for my fortec reciever but its really a pansat clone can u plz tell me ??? and if u could also tell me which bin to download im really new to this stuff ! |
|
coldgirl Unregistered guest | I went to a friends house and tried to download off his computer with my cable. Flash failed. Hooked up his computer and it worked. How come they give you cables with the receivers that don't work. |
|
HOT-AZZ Unregistered guest | -You didn't bend over far enought to let him smell your fur-burger coldgirl....He wanted to give you the long stroke....ROTF |
|
Silver Member Username: SpankPost Number: 234 Registered: Oct-05 | Coldgirl, depends where you buy it. A lot of the dealers are known to give you the wrong cable. At least you got it working and now know what cable to use in the future. |
|
Bronze Member Username: KonfusedPost Number: 11 Registered: Aug-05 | guys other than this bull crap bingo site have been trying to register for the last bl**dy one hour but that site is slower than a snail |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 513 Registered: Oct-05 | @Kon Fused dsscentral .net no need to register. |
|
Bronze Member Username: KonfusedPost Number: 12 Registered: Aug-05 | thanks again h3 you are very nice indeed the file names at the dss are a bit different than what is mentioned in 1st port in this thread any idea if they are still the same?? |
|
Silver Member Username: H3lt3r_sk3lt3rPost Number: 525 Registered: Oct-05 | @Kon Fused There should be a short description to the right of the file name, it tells you whats in the new bin. Once you unzip it, the bin should have the same name as one above. You might also want to check here: |
|
cold-b1tch Unregistered guest | A spanky, whats up....Do you want some of coldgirls fur-burger....For get it boy....Its pushed so far back in her azz o that she as a set of tail-lights....You would be one of many many, many dick-s boy....You are dum...ROTF |
|
barbspeaking Unregistered guest | I would like to flash my fortec ultra lifetime back to factory settings....is there a bin for that or is it something you do with your remote? I have a fortec lifetime ultra that didn't take the bin right and the menu seems messed up - it keeps going to 'language' whenever I try to exit the menu. Would really appreciate a little help. Thanks in advance! |
|
Anonymous | FTACENTRAL DOT COM DSSCENTRAL DOT COM AND OTHERS |
|
new_to_fta Unregistered guest | I just flashed a fortec receiver with the bin file "Al7bar_FTA_Ultra_050926_282_api_NTSC__11_7_05". The channels work fine, but the receiver does not seem to respond to the remote. Is there something else I need to do? I'd appreciate all the help. Thanks. |
|
Anonymous | I need the dish setings for my fortec ultra echo 7 and echo 6.8 [110 ;119 ] skew and horizontal. Toronto ont. |
|
Bronze Member Username: PrfrmnjPost Number: 32 Registered: Oct-05 | Change the batteries on your remote! |
|
New member Username: WazupPost Number: 1 Registered: Nov-05 | I have a Fortec Star Lifetime ultra and one DISH pro 500 antenna towards 110 and 119, How could I hook another receiver using the same antenna? And When I disconnect the box, for the occasional upgrade, and I connect it again it completelly looses the 110 channel. The signal stength is looks good but I get not signal. Then a couple of days or weeks later image could be seen on the 110 channels, Is that normal? Thanks wazup |
|
New member Username: WazupPost Number: 2 Registered: Nov-05 | I have a Fortec Star Lifetime ultra and one DISH pro 500 antenna towards 110 and 119, How could I hook another receiver using the same antenna? And When I disconnect the box, for the occasional upgrade, and I connect it again, it completelly looses the 110 channels. The signal stength looks good but I get not signal. Then a couple of days or weeks later image could be seen on the 110 channels, Is that normal? Thanks wazup |
|
New member Username: SonirohiPost Number: 1 Registered: Nov-05 | I just installed Fortec Ultra using single LNB to a Echo 3 61.5 satellite. I am not getting any channels. My receiver has: AI7bar - 2.81t, Boot version 6.0 dated Sept 26, 2005. The signal strength is 75%. When I do Power scan it says 0 Transponders found. Thanks |
|
Bronze Member Username: PrfrmnjPost Number: 34 Registered: Oct-05 | @Rohit - Load Bin 282t. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics