I currently have 119 and 110 set up. i want to get 61.5W however the channel list in my pansat shows only 119 and 110. is there a way i can get 61.5W on there as well?
Dishnet Pro lnb setup: Dish 500 with DishPro LNB setup My Equipment: Fortec Ultalife Time 281api Dish 500 with Dish Pro LNB with 2 outputs (built in switch) DTV 18' Dish with Single LNB 2 outputs Disqec 4in1
On the DN 500 DP lnb setup:
-------EchoStar 7 Sat 119------- DN DP on 119 output to Disqec #1 LNB Type: 11250 22KHZ On Disqec #1 LNB Power On TP 12224 V 20.000
-------EchoStar 6/8 110--------- DP 119 same as Sat 119 setup one cable LNB Type: 11250 22KHZ off Disqec #1 LNB Power On TP 12224 V 20.000
-------EchoStar 3 61.5 Sat------- LNB Type: 11250 22KHZ off Disqec #2 LNB Power On TP 12239 H 20.000
Important Note: Since my setup is with DP LNB I h ad to convert all of the H tp's to V Tp's. All you have to is get the lastest Tp Freq and convert. (formula 25600 subtract by H TP = new V TP) If you want to download Channel Master you can use any channel list and use conversation tool, it does it automically
If you have legacy LNB does not apply. Ex. TP2 12239 H subract form 25600 = 13361 V