To get 119 channels, can i get 119 LNB?
|
New member Username: ConvidencePost Number: 9 Registered: Jun-05 | mine one is 110. I can't pick more Dishnet channels. I don't like 110 that much. There are less good channels to watch. |
|
Bronze Member Username: Thechiz2Mars, Ur anis Mine Post Number: 39 Registered: Apr-05 | move ur dish to get 119 then |
|
Anonymous | Better yet, add another dish and a 22kHz switch or a 2x1 diseqc. Then you can have both sats working for you. |
|
Silver Member Username: BootleggerPost Number: 128 Registered: Apr-04 | You can make a PoorMans dish to pickup 110, 119 very easily.I've been going that way for over a year. Boots |
|
Silver Member Username: BootleggerPost Number: 129 Registered: Apr-04 | Bon, don't uderstand your thinking of sat 110, their are over 250 channels you can receive there. All the ppv's, some movie's. an much more. Your IRD must not be set up properly.Boots |
|
Silver Member Username: BootleggerPost Number: 130 Registered: Apr-04 |  This is a picture of a PoorMans dish 110 is in the middle with 119 straped to the right slightly higher( facing the dish) than 100. using a Diseqc switch, to switch back an forth between them. Boots |
|
Bronze Member Username: Thechiz2Mars, Ur anis Mine Post Number: 50 Registered: Apr-05 | not to be a smart a*s but cool r u from the south |
|
New member Username: Slo_hand2Post Number: 9 Registered: May-05 | boots very unique way liked the idea |
|
Silver Member Username: BootleggerPost Number: 131 Registered: Apr-04 | It, works. set up over 30 of them just like that.cheap way to do 2 sats with one dish. an yes I'm from the south. But if you do your homework there is all kinds of ways to set up dishes.This is a weel know setup seen on many forum sites. try it you'll like it. Boots |
|
Silver Member Username: BootleggerPost Number: 132 Registered: Apr-04 |  This is also a great setup, did it for a friend a few months ago. Notice the tupperware. lol. It's to protect the switch and connections. that was his idea. Boots |
|
Bronze Member Username: ConvidencePost Number: 16 Registered: Jun-05 | thx for showing me the picture so that I could understand how to do it. |
|
Anonymous | Where would 119 be if I am currently picking up 110 with a dishpro lbn and dish 500 dish? |
|
Bronze Member Username: P2bPost Number: 17 Registered: Jul-05 | 119 info [link removed] http://www.tivocommunity.com/tivo-vb/showthread.php?t=246416 http://www.sadoun.com/Sat/Installation/Satellite-Heading-Calculator.htm HTH The P2b |
|
Silver Member Username: Maple_leafPost Number: 490 Registered: Apr-05 | 9 degress right of 110 and up 1 or 2 degress. |
|
Anonymous | MapleLeaf would the 9degrees and 2degrees up also work with the dishpro and a dish500 dish? |
|
Silver Member Username: Maple_leafPost Number: 498 Registered: Apr-05 | yes the sat is still there. A dish 500 has 2 lnb's one for 110 and the other for 119. |
|
Chicago Unregistered guest | Just who is this internet Conan tough guy who needs to be bich slapped... Go Away!...U are UNWANTED!...U must be Kneegrow! |
|
Anonymous | Help.... Everything was running fine but suddenly my receiver went blank. I see full quality and signal but no channels. I tried new bin with new channel list on my Lifetime Ultra. Did this ever happen to anyone and how to solve it? I rechecked the Key and they are correct. What do I need to do? Where can I find changing TP? I lost the file with changes. thanks. |
|
chicago Unregistered guest | try a reboot/reset of receiver...BACK of receiver,power OFF,wait 2 minutes,power ON,turn to channel 300 |
|
New member Username: PrettyboyPost Number: 1 Registered: Jul-05 | my problem is currently using a sat finder device to look for sat 119, I;m using dishnet pro 500 i get a string beep fomm my sat finder but no signal to my receiver. Can anyone help. |
|
steve123454 Unregistered guest | i have a dish 500 i can get 110 but i cannot get sat 119 should i move the dish aropund looking for 119 or will i lose sat 110 |
|
uptown1864 Unregistered guest | I would like to know if the encore western channel has gone Nagra 2. I can not get that channel on the dish network system. |
|
Salmerin Unregistered guest | What to do if the only signal you get on SAT 119 are the spotbeams? I have tried TP 19,21 but get nothing and just for the hell of it I switch to TP 1 and 2 and I got Spotbeams with SS of 80 and up. Any suggestion as to where should move the dish when it is on the SB? |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics