Anonymous | man......... this jerks gettin stale |
Anonymous | he needs a good dirt nap! |
Silver Member Username: Maple_leafPost Number: 201 Registered: Apr-05 | Mama's calling you. |
Anonymous | Could someone please help me? I have a fortec ultra receiver and I try to scan the satellite signal. And I only have 16 channels and no pay view channels. Did I done something wrong? Could someone please help me to recover my receiver back to normal. Thank you for your great support! |
the 1 Unregistered guest | where do i get keymaster from? |
New member Username: Imports2000Post Number: 1 Registered: Apr-05 | Could someone please help me? These are the steps I have done on my Fortec Ultra Lifetime. 1. I did an autoroll on the system: (File name: al7bar fta ultra_050322_269_apintsc) 2. I did a factory resetting on the system: (File name: Lifetime Ultra_050225_264_api(NTSC)) I did those setting above. And now I have lost all of my channels. Could someone tell me what I have done wrong? Thank you so much for your help! |
LK Unregistered guest | install the 269 autoroll now again ..then reboot the receiver (power off,wait 1 min,power ON- BACK of receiver)...forget the factory 264 bin for now..all should be good after the reboot |
SilkyAsswipe Unregistered guest | hey guys im new here and ive run into a problem. I have a Fortec star Lifetime ultra receiver, that I flashed a long time ago and i thought it needed an update. I downloaded the new stuff i needed, like the fortecstar uploader, gtools, and the new bin file. When I try to update the receiver, it says "flash update fail..." and i cant seem to get past that. I know that the first time i got the receiver, I ran into the same problem but I can't remember how I managed to get by. The com port should be fine, but i'm wondering if the fact that I flashed it before that is causing the problem. I also set it to factory setting before I tryed flashing it again. I would appreciate any help, and I'm sorry if my problem is noobish or anything but I've run out of ideas. |
LK Unregistered guest | Yes I have seen many posts about the same problem with the Ultra and the autoroll...some say its cause of the newer Ultra's,others say that its "operator error" when installing the 269 bin...just change the channel or unplug for a couple hours to fix has worked for all.. copy/paste ....for the Ultra 1) install 269 right on top of what you have. 2) menu, rite arrow twice, down arrow twice to code... hit ok... 1010 is password... now at this screen look at the green box where it says key code fucntion... it must be ON ...if it is not, rite arrow 1x , password is 1668 ...that will turn key code ON...exit exit exit 3 menu, rite arrow twice down arrow twice to code... password 1010... down arrow to where it says " default keys" ok and let them reset.... this will fix anything you screwed up in that screen. exit exit exit... 4) menu rite arrow 3x...to tv channels..... delete all the channels... everything... this will fix everything you screwed up there exit exit exit 5 menu, rite arrow 1 time, down arrow to tp scan... select ONE sat and select all tps and confirm signal as it should be and rescan in that sat. 6) when complete tune into a good station with good signal and wait... I like the first HBO about channel 8 or 9 on 119.... the new codes will roll in a few minutes and you are done. all this should be done with one cable to the rec and no switch or switch settings. if using multi sats, you can dial all that in later after it works. reccomend dumping any channel lists you have regardless of source. |
LK Unregistered guest | Here are a few tips if you are having difficulty flashing: pay close attention,especially the highlights...9-10-11 I would advise everyone to read a set up guide before flashing. But, since people have been having some problems, I have revised this to provide more detailed information. But this is not intended to be a substitute. 1. Make sure you use the proper serial cable for your receiver: Fortec and Pansat use a straight through cable with DB9 females on both ends. The Blackbird uses null (crossover) cable, which crosses over pins 2 and 3. 2, With the power turned OFF, connect it to your computer and receiver using the serial connector. Use serial port #! if you can. 3. If you do not have a working serial port, you must install one or use a computer that has one. 4. Use the appropriate loader. 5. Select the file. Make sure that it is the correct flash for your receiver. 6. Select the COM port your receiver is connected to. If you do not know, what it is try #1 first. 7. Enter the correct model name and number. 8. Check off the correct function box. Your choices are boot, flash or channel list. To FLASH your receiver you would use FLASH. Most flashes do not require a separate boot; so do not load both separately. 9. Turn ON the receiver power from the back switch. 10. As soon as you see the lights flash -- press download. 11. Wait until it completes and reboots. |
Anonymous | Hey all you fellow FTA nuts. I am only 13 years old. If you folks can't talk with some kind of repect. may I Pray For You!!! Slow down. time well only tell. Plelease stop the rudness. Thank You Very Much |
Herman Unregistered guest | Anyone have the new key codes? |
dirty ol' man Unregistered guest | hello 13 year old kid.....wanna play? |
New member Username: Imports2000Post Number: 2 Registered: Apr-05 | Thank you, LK! For your help... nickname: Imports2000 (May 01, 2005).. I just login into the website today. Thanks a lot for your help! |
LK Unregistered guest | Its not programmed for Dishnet or Bev probably...AND there is probably NO keys installed either...it might be just programmed from the factory and dish aligned for Texas free TRUE FTA local channels..U don't say what U paid for.. if its programmed for dishnet or Bev correctly with an autoroll bin (which is how it is correctly programmed,if U paid)then it should work...try resetting it by UNPLUGGING it for 5 minutes,..or on BACK of receiver,power OFF,wait 1 minute,Power ON,now change the channels.. BTW...lose the CAPS...its bad computer etiquette,considered yelling or offensive.. |
LITTLE GIRL Unregistered guest | hi this is billy-bob---13 year old wanna, you wanna, wanna, wanna suuck on my bannana..... or i can have a good shiit and you could eat my shiit. you little slu*t |
Bronze Member Username: MontiPost Number: 30 Registered: Apr-05 | The Password code is not working for my Foretc. When I push menu I put my Password. Then try to go put new code by pushing code. Then It will ask for Passowrd but is not accepting my password. Any Suggestions? |
Anonymous | try rebooting at back |
Bronze Member Username: MontiPost Number: 31 Registered: Apr-05 | I rebooted it and I shut it down for 5 minutes. still the same |
Bronze Member Username: MontiPost Number: 32 Registered: Apr-05 | I have it for 6 - 8 month. Everything was working fine until a week or two ago. I have been getting scrambled or bad channels. I thought may time for new code. But I can't get to the codes. The password is not working th codes. I can go to the menu and delete or do whatever but nor to the codes. Thanks for your help |
LK Unregistered guest | Load the factory bin back on it... |
Bronze Member Username: MontiPost Number: 33 Registered: Apr-05 | The same, It is not accepting password. Whatever I do It seem that it is locked up. I might try to leave it unplugged overnight |
LK Unregistered guest | U don't need the password to load the factory bin...but do whatever U want...unplugging it should NOT work,if a reboot didn't... |
Bronze Member Username: MontiPost Number: 34 Registered: Apr-05 | Any other suggestion regarding codes Password? |
LK Unregistered guest | TRY unplugging overnite..nothing left U can do |
New member Username: SealyboyNassau, New providence Bahamas Post Number: 2 Registered: Mar-05 | new code key 00 data # B4 1C 14 6C F2 31 0D 2E |
Anonymous | monti did you delete the ch. list and do a factory reset before entering the factory flash? |
Bronze Member Username: MontiPost Number: 35 Registered: Apr-05 | For two weeks or so, I have been getting scrambled channels. i thought may be I need to put a new code. I open my menue and enter the password and go to codes Then I need to put a PASSWORD. I put my numbers but will take the passowrd. That is my problem. I had it for 8 months without anyproblem at all not even new code. Any suggestion? Thanks |
Bronze Member Username: MontiPost Number: 36 Registered: Apr-05 | What are the latest code for VU please |
Anonymous | When is dish going down? |
VU Unregistered guest | -FORGET THE CODE FOR VU U CANNOT GET ANY PPV MOVES OR ANY SPORT EVENTS. |
Bronze Member Username: MontiPost Number: 37 Registered: Apr-05 | I have a friend getting all the PPV and HBO. I mean all PPV |
LK Unregistered guest | then he's the only one in the world..if its Bev! |
Silver Member Username: Maple_leafPost Number: 257 Registered: Apr-05 | He has a sub then!!! |
sammy40 Unregistered guest | |
sammy40 Unregistered guest | |
momwith4kids Unregistered guest | KEY0 B4 1C 14 6C F2 31 0D 2E KEY1 0B 27 EC 1E A8 B9 2B 0A Active 11-05-05 19:04:15 |
MylkyD Unregistered guest | Thanks mom. |
momwith4kids Unregistered guest | KEY0 6A CF 0C 39 11 E7 42 60 Active KEY1 0B 27 EC 1E A8 B9 2B 0A 12-05-05 13:05:12 |
Anonymous | momwith4kids KEY0 6A CF 0C 39 11 E7 42 60 Active NO GOOD!!! |
LK Unregistered guest | The new keys posted are GOOD...maybe if U learned how to input them correctly,then U wouldn't say that..they developed the autoroll for people who either cannot or don't want to manually input them..so shame on you for 4 things.. 1..falsely accusing her of posting wrong keys 2..not using the keymaster.exe to get the keys for yourself.. 3..being stupid and not being able to manually change keys yourself 4..being VERY stupid and not installing the autoroll bin to automatically change your keys |
Anonymous | KEY0 6A CF 0C 39 11 E7 42 60 Active Thank Mom. |
emad Unregistered guest | thanks alot |
amigo33 Unregistered guest | KEY0 6A CF 0C 39 11 E7 42 60 KEY1 95 29 19 8E 6E 76 FB C8 Active active on Fri 13, 2005 |
Spectre Unregistered guest | Just Curious, For some reason I am unable to download, if I take reciver to my friend's place and plug in I can download noproblem but at my house I cannot. However I can view the programs fine at my place after downloading at his house. ?????? Level 85 Quality 90 |
Just George Unregistered guest | Here are a few tips if you are having difficulty flashing: pay close attention,especially the 9-10-11. I would advise everyone to read a set up guide before flashing. But, since people have been having some problems, I have revised this to provide more detailed information. But this is not intended to be a substitute. 1. Make sure you use the proper serial cable for your receiver: Fortec and Pansat use a straight through cable with DB9 females on both ends. The Blackbird uses null (crossover) cable, which crosses over pins 2 and 3. 2, With the power turned OFF, connect it to your computer and receiver using the serial connector. Use serial port #! if you can. 3. If you do not have a working serial port, you must install one or use a computer that has one. 4. Use the appropriate loader. 5. Select the file. Make sure that it is the correct flash for your receiver. 6. Select the COM port your receiver is connected to. If you do not know, what it is try #1 first. 7. Enter the correct model name and number. 8. Check off the correct function box. Your choices are boot, flash or channel list. To FLASH your receiver you would use FLASH. Most flashes do not require a separate boot; so do not load both separately. 9. Turn ON the receiver power from the back switch. 10. As soon as you see the lights flash -- press download. 11. Wait until it completes and reboots. |
MR.OOOOOOOOOO Unregistered guest | fu****ck U fu****ck U fu****ck U mr.oooooooooooooooooooooooooooo |
Anonymous | I'm surprised that they don't block this idiots IP. |
Silver Member Username: Maple_leafPost Number: 299 Registered: Apr-05 | Which one?? LMAO |
THE POST-MAN Unregistered guest | THE ONLY IDIOTS ARE THE LEAF AND HIS FRIEND LK....ALSO LET US NOT FORGET ABOUT BILLY-BOY THE ONE EYED JEW. THEY ARE ALL F*U*C*KED. |
THE POST-MAN Unregistered guest | U-ALL U-ALL-U-LL CAN EAT MY SHIIT THAT IS RIGHT EAT MY SHIIT I FLUSHED BETTER THEN U F*U*C*KIN IDOTS EVERY DAY DOWN THE TOILET. (u shiit heads) |
momwith4kids Unregistered guest | KEY0 12 36 3A 6F D8 F4 BE 6A Active KEY1 95 29 19 8E 6E 76 FB C8 16-05-05 15:02:56 |
THE POST-MAN Unregistered guest | THIS IS THE POST-MAN WHICH ONE OF YOU F*U*C*KIN IDOTS WANT TO S**U**C**K ME OFF. I KNOW THAT THE LEAVE LOVE TO GIVE HEAD. I KNOW THAT BILLY-BOY GIRLFRIEND AS NO TEETH AND SHE GIVES IT TO HIM UP THE AZZ-O I KNOW THAT LK IS A JURK OFF HE LOVE TO BANG ON MY MEAT ALL DAY LONG. BUT I SORRY TO TELL U-ALL I LOVE KNEE-GROW THE BEST HE LICKS HIS LIPS AND I CAN STICK HIM TO THE WALL FOR A GOOD PL*OW JOB. |
THE POST-MAN Unregistered guest | -MOMWITH4KIDS,HI YOU F*U*C*KING O. DON'T U THING U HAVE GOT ENOUGHT KIDS-KEEP YOUR LEGS CLOSED WE DON'T NEED ANYMORE GOATS......U F*U*C*KING ooooooooooo. I KNOW WHAT U WANT YOU WANT TO MEET MY FRIEND DICK! DON'T U?????????NO F*U*C*KING WAY oooooooo |
THE POST-MAN Unregistered guest | -MOMWITH4KIDS,HI YOU F*U*C*KING O. DON'T U THING U HAVE GOT ENOUGHT KIDS-KEEP YOUR LEGS CLOSED WE DON'T NEED ANYMORE GOATS......U F*U*C*KING ooooooooooo. I KNOW WHAT U WANT YOU WANT TO MEET MY FRIEND DICK! DON'T U?????????NO F*U*C*KING WAY oooooooo |
LK Unregistered guest | Well U can be sure ...KNEEGROW IS BACK! |
Silver Member Username: Maple_leafPost Number: 301 Registered: Apr-05 | Yes we have our share of kids playing with themselves they didn't go blind just turned to idiots. |
THE POST-MAN Unregistered guest | HI LEAF WHY DON'T U TAKE A WALK ON THE 401 U RETARDED F*U**CKER. U ARE LIKE A FU**CK**IN MONKEY BLA-BLA-BLA EVERY DAY. U NEED ALSO TO GET THE fffffffffff-OFF THE MESSAGE BOARD U ALSO SERVE NO USEFUL PURPOSE. |
Silver Member Username: Maple_leafPost Number: 303 Registered: Apr-05 | Poor baby your momma still hitting you on head??? |
THE POST-MANM Unregistered guest | MR.LEAF LIKE I SAID U SERVE NO USEFUL PURPOSE NOW STAY OF THIS MESSAGE BOARD BEFORE I HACK YOUR (PC) MAKE LIKE A LEAF AND LEAVE.IN OTHER WORDS F*U*C*K off. AND AS FAR AS MY MOMMA IS SHE IS NOT LIKE YOUR MOMMA A "f*u*c*kin O. YOUR MOMMA IS A ooooooooooooooooooooooo |
ms.fish Unregistered guest | KEY0 12 36 3A 6F D8 F4 BE 6A KEY1 02 4D 58 19 8C 3A C5 C4 Active 17-05-05 13:00:53 |
THE POST-MAN Unregistered guest | THERE IS AN APPOINTED TIME FOR EVERYTHING. AND THERE IS A TIME FOR EVERY EVENT UNDER THE SUN. A TIME TO GIVE BIRTH A TIME TO (die) A TIME TO PLANT A TIME TO UPROOT WHAT IS PLANTED. A TIME TO KILL AND A TIME TO HEAL-A TIME TO TEAR DOWN AND A TIME TO BUILD UP-A TIME TO WEEP AND A TIME TO LAUGH A TIME TO MOURN AND A TIME TO DANCE- A TIME TO THROW STONES AND A TIME TO GATHER STONES-A TIME TO EMBRACE AND A TIME TO SHUN EMBRACING- A TIME TO SEARCH AND A TIME TO GIVE UP AS LOST-A TIME TO KEEP AND A TIME TO THROW AWAY-A TIME TO TEAR APART AND A TIME TO SEW TOGETHER-A TIME TO BE SILENT AND A TIME TO SPEAK-A TIME TO LOVE AND A TIME TO HATE-A TIME FOR WAR AND A TIME FOR PEACE-("""BUT WHAT PROFIT IS THERE TO THE WORKER FROM THAT IN WHICH HE TOILS? (*********(it is a time for new keys and a time for no keys)-----(NEW KEYS)-(time 1:00 o'clock ----------------------DISH key.00 ---------12-36-3A-6F-D8-F4-BE-6A-------------- ---------------------(BELL key.00 ---------82-D7-51-E4-5B-97-9D-81--------------- ------------------NEW KEYS--------------------- |
the dog Unregistered guest | mr fish u sound a little fisheeeeeeeeeee to me .get the fffffffffffffffffffff-off my board u ffffffffffffffffffin azz-o. or i will put u down mother f*U*C*ker. |
waIdo Unregistered guest | ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ IGNORE THE STUPIT BlTCH |
THE DOG Unregistered guest | want a DO-WAL,DO-WAL, u are the f*u*c*king O around these parts. we know U do-all, DO-WAL. don't F*C*C*K OFF mad like the stupit B**IT**CH U are just F*U*C*K OFF, jurk-off |
Silver Member Username: Maple_leafPost Number: 306 Registered: Apr-05 | What you out of bones little dog?? |
Biver Unregistered guest | )))p((( |
Biver Unregistered guest | :-) |
THE DOG Unregistered guest | "NO WAY Mr.LEAFM, I GOT ONE MORE BONE LEFT AND THAT IS TO STICK UP YOUR AZZ-O I KNOW U WANT MY D*i*c*k IN YOUR MOUTH U F**u**c**k AND A 1/2. |
Silver Member Username: Maple_leafPost Number: 307 Registered: Apr-05 | Time for school little dog??? |
waIdo Unregistered guest | little doggie bends over........ good boy..... good boooooy |
firefly Unregistered guest | TURN TURN TURN.................. |
LK Unregistered guest | The Byrds have returned! |
Anonymous | these keys are not working on my fortec ultra. Been away for a week. Is anyone elses working? Never had problems before! |
LK Unregistered guest | Get the keys yourself...from either downloading the Getkeys or Keymaster file from any reputable website (al7bar.t k,dsscommunity.c o m) or by going to |
XXXXX Unregistered guest | KEY0 E3 9C F7 66 22 11 48 B7 Active KEY1 02 4D 58 19 8C 3A C5 C4 18-05-05 18:55:49 |
Anonymous | same here, mine are not working either Pansat here, first two sets of numbers swap and the code reads 9C E3 after saving the key. I have never had this happen before, shut off the reciever, took the cord out, i dont know what is going on |
Anonymous | same here, mine are not working either Pansat here, first two sets of numbers swap and the code reads 9C E3 after saving the key. I have never had this happen before, shut off the reciever, took the cord out, i dont know what is going on |
Unregistered guest | Hi does anyone know where I can the Fortec Ultra lifetime box for very cheap. |
LK Unregistered guest | Ebay will be the cheapest..or a tag/garage sale or flea market...as far as sites go, dssliquidators.com ,its $139... |
LK Unregistered guest | another site is ftaworld.com,it's $129..also can order by phone and pay COD.. |
SON OF POST-MAN Unregistered guest | """FLASH--FLASH-FLASH-(GOOD NEWS TODAY) FLASH" Today and every day (lk) will be a good boy! ha that is right-I got him a "porked him so good up the O that I F**U**C**KED brains in him. ("FLASH MORE GOOD NEWS")-I found his friend the so call (leaf) and I porked him and F*U**C**KED some brains in him also. (("FLASH FLASH MUCH MORE GOOD NEW"))-After all that who would every thing what I did next? KNEE-GROW came over to me and asked me to pork him also, and I did, "BUT I gave him a double portion and he got more brains then the other two OOOOOOOOOOO. These three ooooooooo will be good boys from now on.....(PS) sorry I have to cut it short I have to get my school bus...karen will be on the bus at the back, she wants me to "F*U**C*K some brains in her. I pray that I don't get any disease from that oooooooooo. """"""""""""""""""THANK YOU EVER SO MUCH"""""""" |
THE POST-MAN Unregistered guest | NO MR LEAF I GOT ONE MORE BONE LEFT BEND OVER SO I CAN STICK IT UP YOUR OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO |
firefly Unregistered guest | Hey Post Man, you must be a flaming FA99OT!!!! Why are you "porking" all the guys????? You must being m0lested by your father when you were young.....Papa porked your azz good! |
Mr. BiII Unregistered guest | Your idea - of ignoring the jerks trying to be funny and posting insulting comments - is a good one. you see... I know this strategy has worked fine in other forums and chatrooms. Once nobody answers back and pays no attention to their posts, they get demoralized and its a big blow to their self esteem. This must got to hurt and might be the best payback. |
curiousman Unregistered guest | any new code ???? |
THE POST-MAN Unregistered guest | (question from firefly) Why am i porking all the ga*ys like U????????? (ANSWER)---Because i'am not like U firefly U are a U-less f*u*ck going no-where!!!!!!!!get it a ss o...Do U know what your problem is? I know U want some guy or some ga*y to throw a hard f*u*c*k in U , but no one can get it UP because U are to f*U**CKING stupped. popa don't want to M**OLEST U or anyone family member. But being the nice guy I'am for my country I will throw one, just one F*U*C*K in U, C*U*N*T, U O. One more thing MR. POSTMAN TO U, O |
Tomm Unregistered guest | need new keys |
LK Unregistered guest | read these rules...U will be enlightened in many ways! https://www.ecoustics.com/electronics/forum/home-video/137647.html |
curiousman Unregistered guest | key0: C0 25 28 ED 20 1E CE C3 key1: 19 63 02 31 45 9A B5 3E |
LK Unregistered guest | we don't post the keys here anymore...they are posted in ONE place ONLY!...we're cleaning up these forums...this thread is about the ULTRA,NOT keys!...please read the rules linked above 2 posts.. The keys will be posted and updated in the "Latest and Current keys" thread!...ONLY |
Bronze Member Username: HumanPost Number: 31 Registered: Mar-05 | hi LK its been a while but iam back time time LK GOT LITTLE QUESTION .would you know if i could get the (HOT BIRD)SAT SIGNAL EDITE .FOR A FORTEC could there be bin file for it i been searching for one found something like fortec edite when i cheched it out it was ther the HOTBIRD 1 TO 5 WITH ALL THE REST OF SATTELITE SIGNALS BUT FOR EXAMPLE IF I HIGHLITE IT IT DOES NOT SHOW ME THE TRANSPONDERS LIST OR CHANNELS LIST ECT... maybe you would know like this or could help me thanx bye the much respect from my part to you .. and dont pay attention to those jerks that dont use this site for the proper reasons mr. bill is right never mind them.. later |
THE POST-MAN Unregistered guest | PAT THE ONLY THING BILL IS RIGHT ABOUT, IS THAT U HAVE A FLAT HEAD. FLAT AND OUT OF USE, LIKE YOUR FU**CKING BRAIN PULLSTART. |
THE POST-MAN Unregistered guest | GOOD MORNING FIREFLY,,HOPE U ARE DOING FINE, U OOOOOOOOOOOOOOOOOO. I HAVE GOT A BOYFRIEND FOR U IT IS NO-DIICK WAL-DO.........HE IS 1/2 INCH AWAY FROM BEING A SPLIT-A SS...IS O WIFE WALKS AROUND WITH A PICKLE UP HER A SS ALL DAY LONG. SHE SINGS wal-do-wal-do will U do me wal-do. Do U know why she does this????Because I gave her my log in the dark and she things it was wal-do. I f*u*ck*ed her brain out firefly. I won't do U because U have """AIDS""""C*U*NT_FACE. |
Anonymous | /\ ..... being ignored sucks |
THE POST-MAN Unregistered guest | NO BEING "IGNORANT SUCKS" LOL JURK OFF FU**CK OFF A SS-O |
Anonymous | /\ ..... being ignored sucks |
ROTF Unregistered guest | -maple leaf and lk are no doctors???????? they both did a operation on a bird once!! they took the brain out of a bird and put it back in it's head. O the poor bird as not being the same. the birds flys BACKWARDS all the time. And it once could talk by saying good morning. Do U known what it says now?????????(I'AM FCKED-I'AM FCKED-I'AM FCKED) Poor bird. |
THE DOG Unregistered guest | hi waldo, "WHATS UP" a ss o. U fcking bull start retard. That O U have is having lunch on my bone. She wants me to come over to your house to pea on U so that U might smell like a real man. "COME SHOT" |
Anonymous | /\ ...... being ignored sucks now he talking to himself.........poor poor guy |