i just bought 150 feet cable RG6-QS quad shield it goes from the dish to the receiver....when iam at the roof top i get about 95 percet when i hook the cable up it gives me a 75 percent...
how do i know if i have coax connectors right....like iam supposed to cut the braid or leave it in the coax connectors for more signal or what...
and another thing what is the diffrence between dishnetwork keys and bev keys....
can i enter the bev keys and the dishnetwork keys all together or iam supposed to just enter one... the dish or bev keys...
anoher thing i have 2 dishes.....one for 110 and another for 119...
can someone also tell me it there is a better switch i got the coolsatpro 4x1 diseqc switch diseqc 1.2 and here are the specs
freq range 950-2400 MHZ insertion loss 3 db power pasing 500mA MAX
i need help with this because i think everything is fine but when i connect it to the switch the signal goes from 95 to 75 80
is this a normal thing or are there better switch that i can buy....if there is can someone give me some models ect
ill be really thankfull....because everytime my kid tries to see that satellite....it freezes as soon as it rains....and without rains sometimes it also freezes...
Are you married?...If you are that\\'s your problem...ROTF you dumb fcuker
LK
Unregistered guest
Posted on
Kneegrow the Mod here!
Now that Kneegrow has surfaced here again (was probably on paid vacation), have U noticed:
Analman returned Larry Doherty returned Punjavi returned More thrashy disgusting "unregistered" posts There is a campaign to get rid of me and Maple Leaf
Your posts are getting DELETED (many/most of mine) BUT NONE of his (Kneegrow) or his aliases and other "unregistered" thrashy posts..
Now tell me,that Kneegrow is NOT an Ecoustics mod, paid to create havoc here,play the clown,entertain,run these forums so as to draw internet hits for google for the sponsors and Ecoustics,and delete informative posts to save bandwidth and keeps people coming back to ask the same questions over and over (more internet hits at 10 cents each = alot of money),...ITS ALL SO OBVIOUS!...HE'S A MOD HERE!...and a SNITCH/MOLE for DTV,Dishnet,BEV and the FCC...U all think he's funny,but he's got your IP logged and your email addy (if U're stupid enough to register here)and handing it over to the authorities...
just install the factory flash ...and reflash with the new one........that should solve your problem.....
LK
Unregistered guest
Posted on
Not true...manually enter the keys...if yours is froze,then power off,wait 1 min,power on,then hit menu immediately ,then manually change the keys..all autoroll bins/flashs for all FTA receivers,and Dish cards were ECM'd via the checksums by Charlie last night..