Pansat 2700A newbee help please

 

New member
Username: Slo_hand2

Post Number: 1
Registered: May-05
I have been going crazy trying to get my new pansat 2700a to pick up signal, I have gone to several different sites for AZ,EL & Skew and all give me different values and no matter where I point the dish I get a level of 30% and a quality of 0%.
The dish was used but I was assured that the LBNs were good, it is a dish 500.
Can anyone help?
I did download the latest from pansat when I recieved the system.
Anyone have any suggestions
 

LK
Unregistered guest
Your question really has NOTHING to do with the pansat 2700...its all about dish alignment or ...read these rules..

https://www.ecoustics.com/electronics/forum/home-video/137647.html
 

LK
Unregistered guest
This is about the pansat 2700

https://www.ecoustics.com/electronics/forum/home-video/137241.html
 

New member
Username: Slo_hand2

Post Number: 2
Registered: May-05
Like I said I'm a newbie and am not sure if my problem is with the dish or programing I just wanted some help, not trying to clog the message boards or anything like that just wanted some help
 

LK
Unregistered guest
http://forums.al7bar.tk/showthread.php?t=20264

copy/paste into your browser...then remove the * in .T*K...U must register at this other site..which has a very good Pansat 2700 discussion area..this link will help U align your dish..
 

Anonymous
 
these are the latest firmware

X-75BL_050314_236cE_api------for pansat 2300A
X-85BL_050405_246_api----------for pansat 2500A
X-85BL2_050330_245_api--------for pansat 1500A
X-87BL_050519_105_api----------for pansat 2700A
X-95BL_3033_2005_0425_api--for pansat 5000HC

they all autoroll. and the 2700a has a working (epg)!
 

Anonymous
 
use www.dssfeedback.com
 

New member
Username: W4xxx

Post Number: 1
Registered: Jun-05
Have a new 2700A and am trying to set it up on NASA AMC6-C, tp 17. Initial setup, there is audio capability, it is not defective.

I have a great picture, but no sound. I have checked over and over and all the settings appear to be ok. I'm on a fixed dish at the moment and can't check any other satellites.

Any known problems along this line or with NASA. They are just switching to digital, however, are supposed to be working at this time.

Video PID 111, Audio Pid 114

Any help?

Thanks
 

New member
Username: Jg62279

Post Number: 1
Registered: Jun-05
how do you get the xxx channels back on the 2500a
 

LK
Unregistered guest
Kneegrow the Mod here!

Now that Kneegrow has surfaced here again (was probably on paid vacation), have U noticed:

Analman returned
Larry Doherty returned
Punjavi returned
More thrashy disgusting "unregistered" posts
There is a campaign to get rid of me and Maple Leaf

Your posts are getting DELETED (many/most of mine) BUT NONE of his (Kneegrow) or his aliases and other "unregistered" thrashy posts..

Now tell me,that Kneegrow is NOT an Ecoustics mod, paid to create havoc here,play the clown,entertain,run these forums so as to draw internet hits for google for the sponsors and Ecoustics,and delete informative posts to save bandwidth and keeps people coming back to ask the same questions over and over (more internet hits at 10 cents each = alot of money),...ITS ALL SO OBVIOUS!...HE'S A MOD HERE!...and a SNITCH/MOLE for DTV,Dishnet,BEV and the FCC...U all think he's funny,but he's got your IP logged and your email addy (if U're stupid enough to register here)and handing it over to the authorities...
 

untitled
Unregistered guest
dssfeedback.com isn't working on my computer. anyone know what the key is.
 

LK
Unregistered guest
read the rules...it'll tell U where the keys are..
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us