|
New member Username: Newb2dssPost Number: 1 Registered: Sep-04 | Ok, i am a new to all of this. Currently i have a oval dish with 3 LNB's. Can i use this dish? also i have a signal meter, now if i get the pansat 2500a, does it come with directions on how to set it up. what does all the "Dave" Bev" and "charley" stuff mean, is it code for the 101, 110, and 119 sat's? please, any help is greatly appreciated |
|
Anonymous | jorge obvious ur new...yes u can use the oval dish to pick up charlie...u will pick up both sats.and yes they com with directions but there not much help...dave is directtv, charlie is dishnet, and bev is bellxpressv......later |
|
New member Username: Newb2dssPost Number: 2 Registered: Sep-04 | thanks a lot, now the dish i have is a directv oval dish, 3 lnb's. so i can get charley with this dish? |
|
Anonymous | Yes....u will get charlie but there's only one thing that sucks with these fta's ..there's no program guide, unless u bring in bev, or use a tv guide.... |
|
New member Username: Newb2dssPost Number: 3 Registered: Sep-04 | okay, how would i go about bringing in bev? |
|
Anonymous | with bev u only need one lnb so aim it at bev...if ur serious about buying one, i will help u further.....peace |
|
New member Username: Newb2dssPost Number: 4 Registered: Sep-04 | So would i be better off just aiming at bev? and Actually i am very interested in buying one, i was just trying to get as much information as possible before jumping into something. |
|
Anonymous | jorge it's up to u which sat u wanna aim at, u can get both charlie sats or just bev, u would need another dish with a single lnb to get all three. check out al7bar.ca u will find everthing u wanna know about fta...later |
|
person Unregistered guest | im having trouble with my pansat 2500 echo 3 . My echo 7 is okay but this just wont work. It just keeps saying that it is downloading data. so not cool. Please help if you think anything will work thnx |
|
Anonymous | How can I get the TV or Progam Schedule (TV Guide) for the echo7@119 or echo6,8@110. Thanks |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 339 Registered: Apr-04 | go to tvguide.com |
|
I wouldnt Unregistered guest | Save your money on this fta cr#p wont work for very much longer |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 340 Registered: Apr-04 | it will work long enuff to pay for itself.......... |
|
I wouldn't buy FTA Unregistered guest | James Millard I seriously doubt that a fta will pay for itself in a few short months. If by some miracle it last a year..... well then maybe. Just useless paper weights like hu junk is all fta's are going to be. |
|
miatrouble Unregistered guest | I have a Pansat 2500a, when I try to download the 2300 2500 downloader and the 8500 bin file, I get error message: flash update failed. I tried com1 and com2, 115200, STB-key:global, and the 8500 binfile. what could I be doing wrong? please help. Thanks |
|
stay away from F T A Unregistered guest | Maybe they've worked for two years but there life will be very very short now. Donot buy a FTA they will be useless shortly |
|
not much to do Unregistered guest | If you can get a key for a dealer card. alls you have to do is stop by a best buy and slip a card out of one of their display boxes! used to work for an electronic store and the cards would last a good 6 months until a reset and then just go get another, no ppv but everything else. you guys work way to hard! |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 347 Registered: Apr-04 | hi my friends...........long time no speak but lifes been good to me so far....visit me @ http://chat.boldchat.com/chat/visitor.jsp?cdid=3272665440&url=http://jmvip3mfile s.worldispnetwork.com/ we can talk i learn many new things |
|
Anonymous | I bought a Pansat 2500a and i hooked it up to a DTV dish, I flashed the reciever succesfully and i got a 86% signal but nothing on the Quality. I don't know if i'am doing it right, i don't know what to put on the parameters of the satellite i choose or i don't know if i'am picking the right satellite. I live in miami |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 389 Registered: Apr-04 | miatrouble check the serial cable..maybe bad...... |
|
New member Username: ForestBay st louis, Ms Usa Post Number: 1 Registered: Nov-04 | i get good signal and quality get alot of channels in search but get bad or scrambled chanel when i try to watch |
|
sally1 Unregistered guest | How can I get the latest unlooper codes for pansat2500a? And once I have the code, what do I have to do to get the cable up again? |
|
Silver Member Username: DeafPost Number: 127 Registered: Aug-04 | forest henry do a rescan this should solve your problem,....and sally1 go to al7bar.tk you will find everything you need |
|
scoob Unregistered guest | To all the naysayers, take your negative B.S elsewhere. I paid 250. for my 2500a, and I dont care if it goes down tommorow. There are still 3000 other fta channels if bev and charlie do go down. It is a hobby that I find enjoyable.I make 250 in a day. I have been watching for 5 months now. At 4 or 5 dollors a video at the srore, do the math. That is if you can add. |
|
desperate Unregistered guest | i'm new at this , i just puchased a pansat2500a and i hook it up to my directtv dish and i can't receive anything. what degreas do i set my dish up? |
|
key largo Unregistered guest | Much reading to do..go to |
|
simpson Unregistered guest | I bought a fortec star lifetime ultra instead of a pansat on accident. Is there any difference besides the name? They say it's a colone of the pansat. Has anyone got there up? |
|
key largo Unregistered guest | many do...need to read the various Dss forums (1 that I mentioned above) and learn how to use the software to get it up and running.. |
|
simpson Unregistered guest | The remote control doesn't work on the fortec I bought. I'm waiting to hear back from the seller. Is there any tricks or anything I can try? If the seller doesn't come through, would a universal remote control work on a Fortec star lifetime? |
|
New Guy Unregistered guest | PLEASE HELP... when i turn the power on...my pansat 2500a blinks the three lights then it says "on", then turns right off... after 30 seconds or so, it'll do the same thing... I'm not sure what to do... I can't even get back to the factory settings to reset it b/c it won't stay on long enough... i even unplugged it and powered it off for a day and it's still doing the same thing... |
|
New member Username: Jnoda1Miami, Miami USA Post Number: 1 Registered: Nov-04 | Hello can anybody tell me how to get the hawaaiin chanels, thanks. |
|
Unregistered guest | I got A PANSAT 2500A and I would like to flash it to receive BellExpress and DNet. Could someone pls say where to get all the necessary soft ware to do the job. |
|
jenny_ny Unregistered guest | when i try to download bin files to pansat 2500a the program freezes and the flash update fails. what do i do? |
|
Corky Unregistered guest | Does the PANSAT 2500A support Closed Captioning? |
|
Unregistered guest | HOW MUCH LONGER DO U THINK THE PANSAT FTA WILL LAST IF I BOUGHT It TODAY? I WANNA KNOW IF ITS WORTH SPENDING $240 I NEED THE RECIEVER AND THE SAT. SO THATS WHY ITS THAT MUCH. I AM IN TRANSITION TO PURCHASE ONE BUT MAKING SURE IT IS WORTH IT. THANKS |
|
Unregistered guest | HOW MUCH LONGER DO U THINK THE PANSAT FTA WILL LAST IF I BOUGHT It TODAY? I WANNA KNOW IF ITS WORTH SPENDING $240 I NEED THE RECIEVER AND THE SAT. SO THATS WHY ITS THAT MUCH. I AM IN TRANSITION TO PURCHASE ONE BUT MAKING SURE IT IS WORTH IT. THANKS |
|
Anonymous | I have a 2500a w/ dtv dish. I aimed it towards 110 and was trying to get both 110 and 119. I am not seeing the channels from 119 like the HBO's that I should have. I think I am not seeing 119 or is there another reason for this mistake? I am using DTV's dual lnb with the discq. switch. Secondly, I tried to use the Fortec 30" dish with the HH90 motor and with the switching and fine tuning I lost the ability to reset the motor back to the 0 degree setting. So I switched back to the stationary Dtv dish. Can anyone help with tech on how to reset my motor to 0 degrees using my Pansat 2500a along with the HH90 motor? |
|
New member Username: Jnoda1Miami, Miami USA Post Number: 2 Registered: Nov-04 | Hello, Im having trouble picking up the hawaaiin channels on sat 119, are they spot beam or will I be able to get them, I live in south florida and Im able to pick up the west coast channels with no problem, any help will be appreciated. |
|
Unregistered guest | Pansat2500A lights go across [flashs 0001] then [0] comes up for 5 seconds and starts all over ???? need help |
|
Anonymous | jorge i. noda hawaii locals are on 119 spotbeam 1. u can't get em unless your in hawaii. |
|
Unregistered guest | hey im new to to all this satalite thing.i own a pansat 2500a and was wondering what free to air channels meant?CAn i get all tegh channels from dish network with it or do i have to buy teh female cables and hook it up to my computer and proram teh box? |
|
Unregistered guest | I forgot my password for my PANSAT 2500A can someone help me. |
|
boobley Unregistered guest | No you can't get Dish channels. You have to hack the machine to get them. And please do not hack. |
|
Anonymous | Are there any support files I need for the Pansat 2500a when I try to download a program? I have done everything like the paper says and can't seem to get anything to work? Would appreciate help in this matter? sk hlp |
|
Anonymous | Can some one help me?. My receiver Pansat 2500A keeps "saying that it is downloading data" |
|
Needhelp Unregistered guest | person: Did any body help you?. look like I have the same problem you are having. |
|
need to know plz Unregistered guest | how do i get channel info on echo7@119 or echo6,8@110. is it possible,plz give info thx |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 399 Registered: Apr-04 | i have the fix.................. jmill1948@aol.com |
|
Unregistered guest | I have a Pansat 2500a hooked up but I cannot get the stations.I get all the info but when I track the satellite it tells me 0 programs found.HELP |
|
Anonymous | I have a Pansat 2500a Receiver and am having a bit of a problem getting it started. I have read all of the instructions and whenever I start to download the information from my PC to my 2500a I get this error reading: "Model Name does not correct". Am I doing something wrong???? I would appreciate anyone's help in this matter. I have emailed several people from the forum and they have asked for money to get the information I need, does that sound right to anyone out there???? |
|
Anonymous | enter the model name exactly! like; Pansat 2500A. capital then small letters. My problem is that when i try to download, it keeps failing, "flash updates failed." I could still watch hundred of channels except for the ppv channels. |
|
New member Username: WzrtvnPost Number: 1 Registered: Dec-04 | has anybody had this problem with there pansat 2500 When i program it I get the channels on my program list but no picture or audio. I just get downloading data then please input data. What am i doing wrong |
|
New member Username: Dj4lifeModesto, California United States Post Number: 2 Registered: Dec-04 | jim organ i have the same problem |
|
New member Username: Bh4478Post Number: 3 Registered: Dec-04 | WHAT MODEL DO I ENTER TO DOWNLOAD I ENTERED Pansat 2500A and it told me model does not correct can anyone help |
|
Anonymous | For those who has "input data" it means you have to change your Key data in 01 which have been changed. |
|
New member Username: Bh4478Post Number: 4 Registered: Dec-04 | what model do i enter |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 404 Registered: Apr-04 | try key:global |
|
BorisD Unregistered guest | ok for many this is the solution that will help u with no reception. if u had a regular setup, and now got a fta reciver and just hooked it up, u will NOT get to watch tv... the most common reasons are... u are using a twin lnb on a dish 500...u need a dishpro or a dual lnb syste...also VERY common is your switches, u MUCT use disque (probably wrong speling) switch, not the commonly used sw-21x, sw-21, sw-41!!!! al7bar.ca and al7bar.tk are VERY VERY good and FREE forum for all skill level testers!!! |
|
largo key Unregistered guest | al7bar.ca is a known scammer |
|
BorisD Unregistered guest | sorry...tk. |
|
BorisD Unregistered guest | largo key What are you talking about a known scammer??? its a FREE forum...AND IT DOESNT SELL ANYTHING!!!! it has 50 000 members...of whitch good few thousand are VERY supportive largo key think before u speak! |
|
new pansat user Unregistered guest | my pansat 2500 shows "0001" for 5 sec and then turns off and on again. it does not respond to any button press and i can't dowload any file to it. what can I do? Help |
|
EROS_mtl Unregistered guest | Me too, after i downloaded the blacklist into my Pansat 2300A, is showed 001 for 1 sec than turns off, than turns On for 1 sec and again off. After a while a little square remains on the screan. I cant do nothing from there. Not even upload or download something to change things. What's wrong? |
|
slasher Unregistered guest | it happened to me too. so a dude told me it got hit and I had to make a dump. but I dont know how. |
|
largo key Unregistered guest | Go to [link removed] or |
|
Unregistered guest | Please help ! Just setting up our pansat2500A and we have a vertical hold problem. Is it that our satalite is not aimed properly? |
|
echo Unregistered guest | hello, i need help because my pansat 2500A has 99% quality, but it says to wait for picture. i don't know what to do. a couple of days ago it worked. what could be the problem?? |
|
New member Username: KbeezyPost Number: 1 Registered: Jan-05 | Hello Everyon, I forgot my password for my PANSAT 2500A can someone help me reset the password thanks |
|
New member Username: ZeemakPost Number: 1 Registered: Jan-05 | Hi Guys... I am as New as New can be. I would like to get some advice as to where I can start. If there is a step by step direction of what I need to buy...what I need to hook up I would appreciate it....Thanks for the knowledge in Advance |
|
Bib macintyre Unregistered guest | I have a DTV system that is being a pain in the butt. Im thinking of getting a FTA reciever and pick up DISHNET. How good is the FTA, and is it a more stable system that wont go down like DTV. IM AWARE THAT DTV IS DOWN, MAYBE OUT for a long time. Any say on picking up BELL in Canada using FTA/ DTV. I mean legal wise. Too risky or what. I know its being done but whats your take on this. Im in TORONTO , CANADA. Thanks in advance George. |
|
New member Username: FtaguyPost Number: 1 Registered: Jan-05 | How can i get the program guide i have 110 and 119 I would like to get all the sats i can. I have 4 extra dishes i can hook up to get the other sats but i was wondering if i can get the program guide if not its not worth it to me to flip thouth thousands and thousands of channels .. If u really know email me i would like to know thankyou |
|
New member Username: ZeemakPost Number: 2 Registered: Jan-05 | Anyone can help with a newbie??? I dont own any equipment yet. I would like to get started. Where do you research what you need and where to buy? Please help thanks |
|
largo key Unregistered guest | adam...no program guide using FTA with Dishnetwork jonathan...[link removed] is great place for newbies to FTA...download the FTA how to's in the file share area there also.. |
|
New member Username: ZeemakPost Number: 3 Registered: Jan-05 | Largo Thank you for the info...I appreciate it. |
|
grannymof8 Unregistered guest | where can i buy a system at in Alabama? |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 411 Registered: Apr-04 | deal with me im the ...........i only deliver the best in fta............. |
|
New member Username: ZeemakPost Number: 4 Registered: Jan-05 | Anybody use Haupauge Receivers? And if you have what are the pros and cons....I am NEW and need help in deciding which is the better way to go? |
|
Alin1 Unregistered guest | It is better to get a fortec because it has closed caption and pansat doesn't,the reason pansat is better because it has keys for the other channels, fortec does too but you will hav to find the code Have Fun |
|
Unregistered guest | i have a pansat 2500 i do like ! i get bellvu. and d-net 110+119 Where do i find similar programing on other sats like dtv or close to it. new but trying hard, need a LIL help. |
|
LK Unregistered guest | No DTV with FTA yet..if U get Bev 61.5-91,and Dish 110-119,then U have most what U will get or really want.... |
|
Anonymous | I get sum weird middle eastern channels when it scans it. It's pointed towards dishnetwork, i dont get the normal cable channels. CAn anyone help? |
|
Bronze Member Username: Analman_returnsPost Number: 36 Registered: Jan-05 | And I heard, as it were, the noise of thunder: One of the four beasts saying: "Come and see." And I saw. And behold, a white horse. There's a man goin' 'round takin' names. An' he decides who to free and who to blame. Everybody won't be treated all the same. There'll be a golden ladder reaching down. When the man comes around. The hairs on your arm will stand up. At the terror in each sip and in each sup. For you partake of that last offered cup, Or disappear into the potter's ground. When the man comes around. Hear the trumpets, hear the pipers. One hundred million angels singin'. Multitudes are marching to the big kettle drum. Voices callin', voices cryin'. Some are born an' some are dyin'. It's Alpha's and Omega's Kingdom come. And the whirlwind is in the thorn tree. The v-i-r-g-i-n-s are all trimming their wicks. The whirlwind is in the thorn tree. It's hard for thee to kick against the p-r-i-c-k-s. Till Armageddon, no Shalam, no Shalom. Then the father hen will call his chickens home. The wise men will bow down before the throne. And at his feet they'll cast their golden crown. When the man comes around. Whoever is unjust, let him be unjust still. Whoever is righteous, let him be righteous still. Whoever is filthy, let him be filthy still. Listen to the words long written down, When the man comes around. Hear the trumpets, hear the pipers. One hundred million angels singin'. Multitudes are marchin' to the big kettle drum. Voices callin', voices cryin'. Some are born an' some are dyin'. It's Alpha's and Omega's Kingdom come. And the whirlwind is in the thorn tree. The v-i-r-g-i-n-s are all trimming their wicks. The whirlwind is in the thorn tree. It's hard for thee to kick against the p-r-i-c-k-s. In measured hundredweight and penny pound. When the man comes around. And I heard a voice in the midst of the four beasts, And I looked and behold: a pale horse. And his name, that sat on him, was Death. And Hell followed with him. FEBUARY 4 2005. |
|
LK Unregistered guest | Go to lyngsat.com for channel listings on each satellite.. |
|
Bronze Member Username: Analman_returnsPost Number: 41 Registered: Jan-05 | JUDGEMENT DAY FEBUARY 4 2005 |
|
Cant find a good name Unregistered guest | I have dish 2500A. I was able to flash it and configure it for local US channels. However, I am unable to get any of the international channels. I have two dishes already installed with correct angles. I think its a software setting issue. Is there any expert who can help me? Thanks allot |
|
New member Username: GreenboyPost Number: 1 Registered: Feb-05 | just got pansat 2500A. I'm lost. where do I go to enter these "codes" I find on various FTA sites? All I'm getting with charlie echo 7 and echo 4 sats is "scrambled or bad channel" Am using my old dishnet dishes, one pointed at 110 and one at 119 ... somebody please help this total newbie. Thanx |
|
Cant find a good name Unregistered guest | Any help with the follwoing question will be highly appreciated. Thanks I have pansat 2500A. I was able to flash it and configure it for local US channels. However, I am unable to get any of the international channels. I have two dishes already installed with correct angles. I think its a software setting issue. Is there any expert who can help me? Thanks allot |
|
Bronze Member Username: Knee_grows_backPost Number: 34 Registered: Jan-05 | ^^^^^^^^^^^^^^^^^^^^^^ start your own thread you fcuking hijacker |
|
Anonymous | have new pansat 2500a how to position direct tv dish. dont have any tools. I am located in southwest florida. lljirik@hotmail.com |
|
Unregistered guest | just got pansat 2550a. got a good signal and quality but only got picture, no sound. did any one out there know what was happening? |
|
Bronze Member Username: HamtecPost Number: 69 Registered: Jun-04 | I have a pansat 2300a. I reflashed it with the leatest fix and the 2300a is in some sort of rebooting loop. I have flashed with factory bin and I have tried the boot repair kit and 2300a is still in this reboot loop.The 2300a will turn is self on and off and came not get it to stop. Came anyone give he idea as to what is wrong and how to fix this problem. Thanx in advance! |
|
Unregistered guest | i am getting the input data code where do i find the right key an where to install them? pleasse post or if possible leave me an email |
|
Unregistered guest | i am getting the input data code where do i find the right key an where to install them? pleasse post or if possible leave me an email |
|
dj again Unregistered guest | oh yeah pansat 2500a |
|
Silver Member Username: Jmill1948Chester, Va Usa Post Number: 508 Registered: Apr-04 | |
|
Unregistered guest | telestar 5? have 2500a and trying to get FTA OFF T5 HAVE 30" DISH AND FORTEC STAR LNBF MODEL FSKU-V ANY IDEAS WHAT TYPE LNB SETTINGS AND LOCAL LNB FREQ.TRYED STANDERD-10750 AND UNIVERSAL1-9750-10600 NO LUCK PLEASE HELP |
|
Anonymous | standard 11250 |
|
Anonymous | what kind of dish i need for program guide and where i get it |
|
LK Unregistered guest | its NOT the dish,its the receiver that gets the "EPG",programming guide...U need coolsat4000 receiver... |
|
Anonymous | what is tilt and elavation for the satellite 119 on the oval dish 3 |