Fortect Lifetime Ultra No Code option

 

New member
Username: Pkaayaa

Metuchen, NJ USA

Post Number: 1
Registered: Mar-05
Need help! please. I don't have an option for "Code", for step 3... in following the steps below.

STEP 1-PRESS: M E N U
STEP 2-FIND CHANNEL EDIT (ARROW RIGHT UNTIL YOU SEE CHANNEL
EDIT AT TOP)
STEP 3-ARROW DOWN UNTIL YOU HIGHLIGHT CODE AND PRESS: O K
STEP 4-FOR PASSWORD ENTER: 1010
STEP 5-ARROW DOWN AND HIGHLIGHT NAGRAVISION AND PRESS OK
STEP 6-PRESS RIGHT ARROW 11 TIMES (YOU WILL SEE DISH NETWORK)
STEP 7-PRESS DOWN ARROW 1 TIME
STEP 8-PRESS LEFT ARROW 1 TIME (YOU WILL SEE KEY 01)
STEP 9-PRESS DOWN ARROW 1 TIME (YOU WILL SEE A SERIES OF
NUMBERS AND LETTERS
STEP 10-ENTER THIS NUMBER 01 C5 FB 21 37 B6 C0 5E INTO THIS AREA,
(IGNORE THE LAST 4 NUMBERS).
STEP 11-PRESS: OK TO SAVE THIS NUMBER TO MEMORY
STEP 12-PRESS: EXIT UNTIL BACK TO TV CHANNEL. YOU ARE DONE.
 

Anonymous
 
need new key for pansat2500a
 

Anonymous
 
I would see waht people are saying first fortec
 

LK
Unregistered guest
Bev/bell has NOT changed Keys since November 2003....and I have posted those keys here at numerous places..also KEY changes APPLY to ANY FTA receiver...all the same,make-model makes no difference

Current BEV/ Bell Keys
AUX0 is active, changed Tue Nov 18 20:00:00 2003
AUX0: 82 D7 51 E4 5B 97 9D 81
AUX1: 65 57 46 14 36 02 D8 DA

The Dishnetwork Keys work on ALL makes/models of FTA receivers...Pansat..Fortec etc..

Current Dish Keys
KEY1 is active, changed Thu Mar 17 17:00:00 2005
KEY0: F0 C9 59 D8 7F 8D 34 13
KEY1: 0B 51 9E B7 EB 20 E7 4D

BTW...here's where/how to get and use BOTH the Pansat 2500 and 2700 autoroll bin v245,which does work..its in this linked thread below..READ!

https://www.ecoustics.com/electronics/forum/home-video/127878.html

If missing channels after a Key change install,..always shut power OFF on BACK of receiver,unplug,wait 1 minute,plug ,turn back ON..if that doesn't fix it,then do a AUTOSCAN (or can add new channel list using Gtools 1.86) via the remote in your installation setup again.
 

Anonymous
 
What do i do with this?
 

Unregistered guest
why dont i have a code box under channel edit for fortec ultra please respond
 

New member
Username: Pkaayaa

Metuchen, NJ USA

Post Number: 4
Registered: Mar-05
Pgg1, I had the same problem. I bought a brand new Fortec star which doesn't come with the street firmware. You need to go and find a new bin file and load using the serial cable. the File can be found .... Read and read....
 

Anonymous
 
Does anyone have the new key for fortec star free to air reciver.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us