Help Appreciated Please. Trying to hook up: Magnavox TV Panasonic DVD Player Home Theater Sound System Dish Network Receiver and I have Radio Shack RF Modulator If DVD works Dish does not and vice versa. Can someone help me, diagrams would be wonderful. Thanks, Bev
I'm guessing your TV doesn't have RCA inputs since you have an RF modulator. The DVD player connects to the modulator with RCA jacks and the satellite with coax. The satellite signal should pass through when the DVD player is off, when the DVD player is on the modulator should switch to the player.
jnesby
Unregistered guest
Posted on
Help trying to connect dvd/tv/stereo get pic on dvd but no sound
jnesby
Unregistered guest
Posted on
Help trying to connect dvd/tv/stereo get pic on dvd but no sound
I HAVE A: 1. TV WITHOUT RCA JACKS CONNECTED TO A RF MODULATOR 2. TIVO/SATELLITE CONNECTED TO RF MODULATOR WHICH IS CONNECTED TO TV; THIS IS FINE. BUT, I HAVE 3. A MAGAVOX STEREO RECEIVER 4. A 5 DISK CD PLAYER CONNECTED TO RECEIVER W/AUDIO CABLES 5. A DVD/VCR COMBO: I'M HAVING TROBLE FIGURING HOW TO CONNECT THE DVD COMBO TO THE MODULATOR, AND TO THE STEREO @ THE SAME TIME, SO THE MOVIES WILL BE ON SURROUND SOUND. THERES A JACK ON MY COMBO THAT SAYS DVD/ VCR. AND A JACK THAT JUST SAYS DVD. IF I CONNECT THE VCR/DVD TO MODULATOR, THEN I HAVE TO CONNECT THE DVD ONLY TO STEREO & THE VCR ISN'T ON SPEAKERS, UNLESS I CONNECT THE VCR TO SATTELITE THROUGH COAX (FOR TV PICTURE), & THE VCR TO RECEIVER VIA YELLOW VIDEO CABLE. COAX FROM VCR DOESN'T SHOW THAT GOOD.IF IF DO VCR/DVD TO RECEIVER, BOTH ARE ON SURROUND, BUT I ONLY HAVE THE "DVD ONLY" JACK LEFT TO PLUG TO MODULADOR, WHICH MEANS THE VCR ISN'T CONNECTED TO TV/ PLEASE HELP
I'm trying to install in-wall cables for a remote (across the room) DVD component video connection to a yet-to-be-purchased LCD or plasma TV. Apparently regular coax cable can be used to carry the 3 video signals to a wall jack, for extension to the TV, but what about the audio signal? I've been told by high end TV shops to install 5 (or as many as 8) coax cables to make the component connection, but am unsure if they will work for audio. And, if so, can one coax handle each audio channel, or would I need 2 cables each for the left and right channels? Many thanks if anyone can help.
I ran Coax for audio about 40 feet, it worked fine for me. I'm just using a surround receiver, nothing fancy, and I don't crank the audio up high. 1 cable per channel is all you need. Be sure to use good quality RG6 cable, not RG59.
I ran Coax for audio about 40 feet, it worked fine for me. I'm just using a surround receiver, nothing fancy, and I don't crank the audio up high. 1 cable per channel is all you need. Be sure to use good quality RG6 cable, not RG59.
i have a daewoo dvd player, it has three plugs (yellow, red ,white) how do i hook it up to my comcast box then to my tv.... old tv only has coaxle input.. probley simple but i cant figure it out HELP PLEASE
I have a Desay Progressive Scan DVD I'm trying to hook up to my mature Mitsubishi TV. I have connected the s-video cable, and the white and red audio to their respective connections. Per the DVD instructions I did not plug in the yellow video connector.
Also -I have digital cable and a vcr connected to the TV. I turned both off when attempting to use the DVD player and the TV is set at channel 3. Still sound, but no picture.
I have Jvc TV connected to Sky box (Thompson)and Sharps vcr which has been recording badly. Am trying to put in Technosonic DVD+R/RW (DVDR2018]and probably remove vcr, although I would prefer not to. A freind helped to set channels on DVD but we could not get Sky set to record on dvdr - I hoped to record a film now and again also we have to change the arial arround if we want to watch TV and have DVD on standby which rather loses the point. Everything seems connected by scart leads and we have not used the red blue & yellow leads. I am sure there must be a way but scared of losing sky pictures - my husband is a football fanatic - is there such a thing as a wiring diagram available, or maybe idiot proof instructions. Help needed please.
Is it possible to connect my dvd to sky reiever via scart then watch the dvd on a tv with the feed taken from the rf out?? ie upstairs tv
any help greatly appreciated
Neil
Ashes
Unregistered guest
Posted on
I have a Zenith TV and a JVC DVD player, and the cable with the red, white and yellow things. and the tv is on chanel 3, but i get nothing.. help me please!
I have digital cable that requires a box, a vcr, and a dvd. I have the rf module and need to know the sequence of connections. The dvd player has no coax just av cable which i have to the rf. coax from wall into ant in on rf. coax out to digital box then to vcr then to tv. vcr works but dvd does not. can someone please explain the correct sequence. thanks, john
winifred
Unregistered guest
Posted on
We have an old TV, a DVD player, A VCR and a stereo that we had all connected through an RF modulator. We moved and are trying to recreate the old system but have forgotten how it all worked.
Currently we have the VCR connected to the RF modulator, the TV connected to the RF modulator and no idea how to hook up the stereo and DVD player. We used the DVD player to also play CD's and that's why we need the stereo hook-up.
If the DVD player has 2 sets of RCA audio jacks, connect one set to the modulator, along with the video, and the other set to the stereo. If there's only one set of audio outputs, then you have to choose between the TV and the stereo.
winifred
Unregistered guest
Posted on
We only have one audio output on the DVD player, but it was definitely connected somehow before. We have cable that was attached to the stereo with audio jacks (red and white) which then connect into one single black jack. We think the single jack was then connected to the modulator, but we're not sure which place to out it.
We also have one other set of red and white audio jacks which we put from the DVD player to the modulator but were unable to get the TV to acknowledge the DVD player and the DVD player to acknowledge the stereo.
If the stereo has a digital audio input, then you can connect the single cable from the digital output on the player to the digital input on the receiver. Then you can use the RCAs for the modulator.
I've got indash tv70 lcd receiving tv channels but no sound, only pictures. How do I hook it up to car stereo for sound? Any posibility of playing dvd also. All components are panasonic