After completing my wiring I have some slack in each of my speaker wires from each speaker. Instead of letting it loose I planned to make like a s-loop of it and tie it with a strap. Is it okay if I bunch all the speaker wires together while looping or is it better to keep it apart?
J. Vigne
Unregistered guest
Posted on
Combine all speaker, line level and power cables in separate bundles of each type and keep them away from each other. If you have to cross a different type of cable (speaker to power) do so at 90 degree angles to each cable. If you have any questions go look at the set up on a sound reinforcement system.
j. vigne
Unregistered guest
Posted on
Also, you are correct in the "S" configuration. Never coil additional cable as you create an inductor that will roll off the high frquencies.