New member Username: Frankz2018
Post Number: 1
Registered: Jul-18
|
Posted on Here's my problem;
Nothing but a loud hum when I turn it on.
Nothing else. I've tried it with my inputs (RCA) connected and without, no difference.
I've checked all four fuses with my DVM and all are good.
No obvious burnt components, caps do not appear discolored or deformed.
Any suggestions would be greatly appreciated. |
Platinum Member Username: Jan_b_vigne
Dallas,
TX
Post Number: 18529
Registered: May-04
|
Posted on .
Ground issue. Could be bad power supply caps or a broken solder joint. |
New member Username: Frankz2018
Post Number: 2
Registered: Jul-18
|
Posted on Solder joints looked good, even under 10x magnification. No cracks, lifted components or obvious corrosion. |
Platinum Member Username: Jan_b_vigne
Dallas,
TX
Post Number: 18530
Registered: May-04
|
Posted on .
If you've ruled out one possibility, you move to the next. |