|
| When watching a DVD I have to have the volume much louder than when listening in the other audio modes. Does anyone have any suggestion about what I am doing wrong. This is very irritating when changing to another audio source and getting blasted out of the room by the volume. |
|
Tim P | I don't know if you receiver has it, but on the 6070 you can set the analog inputs with a -3dB or -6dB setting if they are to strong. Read your manual, see if it is the same as the 6070. |
|
Tim P | Found it, look on page 20 of your manual, it takes you thru the steps to lower the volume of analog sources. |
|
| Hello David You can adjust the analog input like Tim told you. But you can also try to calibrate your system with a Radio Shack sound preasure meter and a set-up disc like Video Essentials or Avia, these discs have a Image Science Foundation & THX certification. This process will give you a better ambience effect and exellent speaker level output power . I recommend to set the sound preasure meter to low response and c weightening, the meter should read 75db in all channels when using the set-up disc pink noise output. Give it a try and send an E-mail to home_ex2003@yahoo.com for your results. Happy Holydays Caesar C, |