|
New member Username: CharlotteexleyPost Number: 2 Registered: May-13 | Hi my battery died and has reset the code to my radio. Please can u let me no what information I need to provide and how I get this so I can obtain a reset code? Thanks |
|
Bronze Member Username: Masterskay62MelitopolUkraine Post Number: 11 Registered: May-13 | CharlotteMegane New member Username: Charlotteexley Remove the radio from the car and after all the letters and numbers on any of the labels, bar codes, and stamped metal body. |
|
New member Username: CharlotteexleyPost Number: 3 Registered: May-13 | Ok thank you. How do I remove the radio? |
|
New member Username: CharlotteexleyPost Number: 4 Registered: May-13 | This image has all the details. Please can u provide the code from this? |
|
New member Username: CharlotteexleyPost Number: 5 Registered: May-13 | Here is the 8200 number 8200256141Tr145 |
|
Gold Member Username: OpelopPost Number: 1306 Registered: Sep-12 | CharlotteMegane New member Username: Charlotteexley CODE 8821 contakt me http://forum.kody-radio.pl |
|
New member Username: CharlotteexleyPost Number: 6 Registered: May-13 | Thank you once I have typed that code in what do I do? |
|
New member Username: CharlotteexleyPost Number: 7 Registered: May-13 | I receive the message error |
|
Platinum Member Username: RegroosterPost Number: 11567 Registered: Aug-08 | PHILIPS RENAULT CODE ENTRY INSTRUCTIONS FOR CARS WITH A STEERING WHEEL REMOTE CONTROL (Note :If you don't have the [¬ ] button then push the thumbwheel in and some will have an [ A¬ ] button ) Turn on the radio and the display will show 'CODE' then 0000 Use the Steering Wheel Remote Controls for code entry. Press the [¬] button then rotate the thumb wheel for the correct first digit Press the [¬] button then rotate the thumb wheel for the correct second digit Press the [¬] button then rotate the thumb wheel for the correct third digit Press the [¬] button then rotate the thumb wheel for the correct fourth digit If the correct code is now shown on screen, press and hold the [¬] button for up to 10 seconds to store the code IF THERE IS NO STEERING WHEEL CONTROL , THEN USE THE PRESET BUTTONS ON THE RADIO Press the First Preset Button repeatedly for the 1st digit to be displayed Press the Second Preset Button repeatedly for the 2nd digit to be displayed Press the Third Preset Button repeatedly for 3rd digit to be displayed Press the Fourth Preset Button repeatedly for 4th digit to be displayed Then press and HOLD Preset button 6 for 10 seconds to store your code (Note :Some radios use Preset Button 5 to store the code ) |
|
New member Username: CharlotteexleyPost Number: 8 Registered: May-13 | Thank you for your instructions. But now I receive the message error. Can u provide any more guidance? |