|
New member Username: Nemo231Post Number: 1 Registered: Apr-13 | hi i lost my keycode i have radio ford 6000cd and serial number is V043220 can anybody help me? |
|
New member Username: JkojkoPost Number: 1 Registered: Apr-13 | Hi I have a Blaupunkt 300, I had to change the battery, and therefore I need a new code. The GM serialnumber is 0300T5505859 Can anyone help me, please. Jesper |
|
Silver Member Username: DeksterPOLAND Post Number: 842 Registered: Sep-12 | jesperNew member Username: Jkojko CODE 9215 contact me http://koddoradia.pl/ |
|
New member Username: Nemo231Post Number: 2 Registered: Apr-13 | and I ? :D |
|
New member Username: JkojkoPost Number: 2 Registered: Apr-13 | Hi Dekster, and thanks for your help. I tried the code, and then I Held the AS button in for a while, but the save sign came again, (but with a lower number). Am I doing anything wrong? Best regards Jesper |
|
Platinum Member Username: RegroosterPost Number: 11558 Registered: Aug-08 | re : # tomas FORD V SERIAL FORD V SERIAL NUMBER CODES If your radio has the Ford V Serial Number then it will not normally be available for free as access is required to the Ford factory database (unless you can blag it for free from Ford) A recommended cheap and reliable place is here www.ukbookshelf.co.uk/fordv Otherwise try your Ford Dealer or a Radio Decoding Service |
|
Platinum Member Username: RegroosterPost Number: 11559 Registered: Aug-08 | re : # jesper BLAUPUNKT 9215 is the correct code for the Serial Number quoted...so make sure that this is the one on the label or stamped in the metal casing ---------------------------------------------------------- TO ENTER A BLAUPUNKT RADIO CODE Switch the ignition key ON Press and hold AS button and the ON button at the same time Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed If the display now shows the correct Code number then Press Button AS and hold to Enter and if successful there should be a "Beep" from the speaker and the radio should switch on |
|
New member Username: JkojkoPost Number: 3 Registered: Apr-13 | Hi I have a Blaupunkt 300, I had to change the battery, and therefore I need a new code. The GM serialnumber is 130054211402 Can anyone help me, please. Jesper |