RENAULT MEGANE SCENIC RADIO CODE

 

New member
Username: Eyelash

Post Number: 2
Registered: Mar-12
PLEASE could you help me find the code for my car?
Renault Megane Scenic 1992
Information from Radio:
RN278F20017349
8200150474TQ157
Am despairing! The buttons on the radio (Philips) only go from 1 through to 6.
Many thanks
 

Platinum Member
Username: Regrooster

Post Number: 11064
Registered: Aug-08
try code 9862

PHILIPS RENAULT CODE ENTRY INSTRUCTIONS

FOR CARS WITH A STEERING WHEEL REMOTE CONTROL

(Note :If you don't have the [ ¬ ] button then push the thumbwheel in and some will have an [ ¬ ] button )

Turn on the radio and the display will show 'CODE'

Use the Steering Wheel Remote Controls for code entry.

Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit

If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code


IF THERE IS NO STEERING WHEEL CONTROL , THEN USE THE PRESET BUTTONS ON THE RADIO

Press the First Preset Button repeatedly for the 1st digit to be displayed
Press the Second Preset Button repeatedly for the 2nd digit to be displayed
Press the Third Preset Button repeatedly for 3rd digit to be displayed
Press the Fourth Preset Button repeatedly for 4th digit to be displayed

Then press and HOLD Preset button 6 for 10 seconds to store your code

(Note :Some radios use Preset Button 5 to store the code )
 

New member
Username: Eyelash

Post Number: 3
Registered: Mar-12
Thanks Reg Rooster. The problem is that I don't have a button for 9 or 8. My buttons only go from 1 to 6. Also, there is no display on the radio. Regards, Eilis
 

Platinum Member
Username: Regrooster

Post Number: 11082
Registered: Aug-08
Read the instructions again as it involves MULTI-PRESSING of buttons 1 > 5 or 6 ..it does not need a 8 or 9

You will need a working display
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us