Boss Amp - Protection Light On

 

New member
Username: Eddiemabo

Queenscliff, QLD Australia

Post Number: 1
Registered: Sep-11
Hey,

I have a Boss Ba-800 amp and the protection lamp is on and I cannot fix this.

- Amp was working then stopped whilst driving

- Now turn amp on and green power light comes on shortly followed by the protection light coming on and the power light switching off

- Amp seems to flick the power on every 10sec or so for a brief moment. Like its trying to work

SO FAR I HAVE TRIED:

- Removing all speaker cables, and RCA etc (Red light still on)
- Having just the B+, Rem, and Earth connected.
- Checked the earth, runs directly to battery in 50cm cable
- Checked B+ connection and Fuse
- Remote is running through 5m long wire, checked voltage with multimeter (12.5v) supplied
- Checked B+ Voltage (12.5 – 13V)
- Checked resistance with multimeter on all connection including speaker connections, all resistances are high
- Checked all transistors for shorts using multimeter, all fine

What should I do now?

Cheers
 

Platinum Member
Username: Glasswolf

Columbia, South Carolina

Post Number: 14541
Registered: Dec-03
It's a cheap amp, and poorly made. the amplifier failed. you won't be able to fix it unless you open it up and happen to have a degree in electrical engineering, or have the schematics to that particular amp and access to the parts like the transistors/finals and power supply bits to replace the damaged parts. It'd be cheaper to spend $40 and buy another Boss amp.

sorry
 

Gold Member
Username: Sinful_systems70

15 INCH WANG...

Post Number: 1336
Registered: Nov-06
I agree with GlassWolf . Save your time and money and buy a new amp.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us