|
Bronze Member Username: JaymoungMichigan Post Number: 76 Registered: Dec-09 | im gettin a pretty good deal on a used kinetik 1400 battery....my question is well this battery(second) be good enough to support a 2000 rms setup 15 inch memphis mojo 1750 rms |
|
Silver Member Username: MystrePemberville, Ohio USA Post Number: 660 Registered: Sep-05 | Not according to the Kinetik website. That would do well with a system of 1400 watts. That's just what I see on their website. Someone else might have a better idea. |
|
Bronze Member Username: JaymoungMichigan Post Number: 78 Registered: Dec-09 | i found a 2000 kinetik for a good price 2 but i didnt wanna grab the bigger 1 if the smaller 1 would work out |
|
Silver Member Username: MystrePemberville, Ohio USA Post Number: 661 Registered: Sep-05 | Go for the bigger one. That gives you room to upgrade also. |
|
Bronze Member Username: JaymoungMichigan Post Number: 79 Registered: Dec-09 | i think the 2400 is wats required for my setup im just trynna find out what i could get away with |
|
Silver Member Username: MystrePemberville, Ohio USA Post Number: 662 Registered: Sep-05 | The 2000 would be fine if you only put the amp on it |
|
Gold Member Username: Gcs8Atlanta, Ga Post Number: 1781 Registered: Sep-09 | http://www.kinetikaudio.com/2009/powercalc.asp http://www.kinetikaudio.com/2009/powercalc.asp |
|
Platinum Member Username: Nd4spd18Philadelphia, PA Post Number: 11674 Registered: Jul-06 | My advice stop "'trying to figure out what you can get away with" that will only cause you trouble in car audio, and do it right. |
|
Gold Member Username: SomedonniedudeIllinois Braaap MX Post Number: 3086 Registered: May-07 | Depends on the amplifier and what ohm load you run it at, as well as your current electrical (alternator and under the hood battery, as well as vehicle). |