Help me, I don't have the code of the build in radio in my renault megane scenic 1.4 2005. The only numbers I can find are: VF1JA1H0525528838 7700432098 7701047604 087558 04HCR PL 20 02A 011a 8061 22h20 18-09-2001 GTD4X2 89002988.
I can't take out the radio and look on that. So I hope you can help me.
Inkie10 unless you have the security code like Q123 OR 7700432098XXXX <That number again with a letter and three digits on the end. you need to remove the radio. they are too small holes each side of the radio use an old metal coat hanger 4 darts or very small screwdriver or long nails. put into holes about 4-5cms and push outwards sideways and carefully pull radio forward. you must do the holes on each side at the same time
Then post the numbers/letters from below the main barcode something like 7700xxxxxxtt123 or 8200xxxxtt123 or the security code like Q123 or T0U123 can be found in a small box then i can help you off of the radio
Inkie10 your code 6631 you must hold at the end to store the code. IF YOU DONT HAVE KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A} KEY
Turn on the radio and the display will show 'CODE' Use the steering controls for code entry. Press the [ ] button then rotate the thumb wheel for the correct first digit Press the [ ] button then rotate the thumb wheel for the correct second digit Press the [ ] button then rotate the thumb wheel for the correct third digit Press the [ ] button then rotate the thumb wheel for the correct fourth digit If the correct code is now shown on screen, press and hold the [ ] button for up to 10 seconds to store the code
FOR NO STEERING CONTROL press the first preset button for the 1st digit, second button for the 2nd digit third button for 3rd digit forth button for 4th digit then press and hold button 6 to store. for 10 seconds