managed to find my code on top of the radio (Laguna) took three tries -ERROR code flashing and beeping- and during the third; I was pressing lots of buttons, switching it on and off, then it started working.............! BUT, now it beeps every two seconds when the radio/CD is on.
you need to store code by hold at end. whats your model ? if you post the numbers/letters from below the main barcode something like 7700xxxxxxtt123 or 8200xxxxtt123 or the security code like Q123 or T0U123 can be found in a small box then i may be able help you
Hi Hay88 After I put the full code in, I pressed the same button, (under the column) until it beeped, it then said ERROR, I switched it of and then on and it 'worked' except the 2 second beeping started......
I will post the other codes later when I get home. Cheers
Unclebuzz your code is 1926 you must hold at end to store code.So try to unplug the radio then plug back in. then turn it on, if it say Error/CODE on the display then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. Code Entry as Follows:
Switch Radio On - Display Shows " 0000 " with the 1st digit flashing Rotate " Thumbwheel " For Correct Digit Press " " On The Stalk Control To Enter Rotate " Thumbwheel " For Correct Digit Press " " On The Stalk Control To Enter Rotate " Thumbwheel " For Correct Digit Press " " On The Stalk Control To Enter Rotate " Thumbwheel " For Correct Digit If the correct code number is now shown Press And Hold " " Until A Beep Is Heard