Wiring question - ya ya not woofer related

Austin Kitchen Silver Member Username: Skateguy92 Post Number: 117 Registered: Jul-07	Posted on Saturday, August 21, 2010 - 21:29 GMT I'm pretty sure I am over thinking this but how should I wire my components to my 4channel amp to see the 4ohm bridged? Just connect the left speakers to channel 1&2 bridge.... and the right speakers to 3&4 bridge? And the RCA I would connect one end to the 'left front" and the other to the "rear right" ? The amp is an older US made Eclipse 60x4@4 120x2@4 bridged. Finally got my setup all bought. For anyone that is curious this is going in a 350Z Pioneer 3200bt 13 w5 - paired with a JL HD750/1 HD 62 CF mids with hd-100 tweets and the ACTV crossovers.. (hopefully switch to active soon) Old school eclipse amp And 20feet of second skin damp pro for the doors.
M.S. Platinum Member Username: Nd4spd18 Philadelphia, PA Post Number: 11318 Registered: Jul-06	Posted on Sunday, August 22, 2010 - 01:05 GMT You have the wiring correct, but with some amps, you need to use splitters to pipe the RCAs into all 4 jacks. May want to find that out.
deathoob Gold Member Username: Gcs8 Atlanta, Ga Post Number: 1249 Registered: Sep-09	Posted on Sunday, August 22, 2010 - 01:28 GMT there may be a switch for 2 /3 /4 chan mode set to 2 chan and use front left and right, thats my guess.
Austin Kitchen Silver Member Username: Skateguy92 Post Number: 118 Registered: Jul-07	Posted on Sunday, August 22, 2010 - 02:10 GMT Thats it... I believe there is a switch for 2/3/4. You cannot find much info on an old school amp like this. Thanks

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us