Wondering if i could get some input here.. First, i have tried to hook the horn honk option up vs. the siren, but can't for the life of me figure that one out. The wiring diagram says i have a (-) horn honk, and at the actual horn itself, it recieves 12 volts. Any help here would be awesome. If i need a relay or whatever else please be as detailed as possible.. Then, i cannot program anything. It says i have to have the green wire which is for negative door triggers, which is what i have, but when it is hooked up, the valet/programming doesn't activate like it is supposed to. And when i close the door and arm, i get the bypass chirp apparently because my light stays on for 10 seconds after the door is closed, which i believe is another prgrammable feature, but i again cannot get to. PLEASE help a brotha out here..
Let me clarify, the valet switch works fine, but when i try to do any programming it will not do what the book says it is supposed to i.e. chirp for feature set 1 etc.... When i do hook the green wire up cause it says it has to be connected in the book for programming, i get nothing still, and the bypass chirp..