I have bought a Renault Megane Scenic expression 02 plate, but the radio asks for a code which the previous owner does not have. Could someone please help and instruct on how to enter it would also be helpful.
Serial No: RN258F20062057 TOR341 product No: FD0102270062057 Thanks
: Peachy your code 8689 you must hold at end to stord code.
Code Entry as Follows:
Switch Radio On - Display Shows " 0000 " with the 1st digit flashing Rotate " Thumbwheel " For Correct Digit Press " " On The Stalk Control To Enter Rotate " Thumbwheel " For Correct Digit Press " " On The Stalk Control To Enter Rotate " Thumbwheel " For Correct Digit Press " " On The Stalk Control To Enter Rotate " Thumbwheel " For Correct Digit If the correct code number is now shown Press And Hold " " Until A Beep Is Heard
Thanks for your help and quick response, but the radio is a Tuner list push button model, which has six buttons and a random button. When I turn the radio on it just says CODE, it does not go to 0000 for some reason.
Peachy the thumbwheel if on the steering where you tune radio etc. but you can try this way. you must hold at end to store code. FOR NO STEERING CONTROL press the first preset button for the 1st digit, second button for the 2nd digit third button for 3rd digit forth button for 4th digit then perss 6 OR 5 for 10 seconds to store code
Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. untouched don't touch any button cause if you do the wait time starts from begining