|
New member Username: HenrythreeyahoocomPost Number: 2 Registered: Feb-10 | i need help with how two wire the sub.parallel etc.and how to hook to amp one of the channels or bridged.thanks hooking an 850.2 kicker to 1 dvc 2ohm sub.600rms |
|
New member Username: DkeezyHouston, TX Post Number: 4 Registered: Feb-10 | http://mobile.jlaudio.com/support_pages.php?page_id=161 |
|
Silver Member Username: SkdooleyRoanoke, VA Usa Post Number: 241 Registered: Oct-09 | lol wow. I couldnt imgaine running 5 and 6 woofers off one amp. Nice diagrams though. |
|
Bronze Member Username: TkzoneClearwater, Florida USA Post Number: 20 Registered: Jan-10 | Hey bud you want a 2 ohm load but you have a 2 ohm dvc sub? No bridge needed run each coil to its own channel just like you had 2 svc subs cause essentialy thats what you got. Each coil will see a 2ohm stereo load and whatever the 4 ohm mono rms power rating is will be the total draw from the sub. Or just run a 10/12 gauge jumper wire from coil 1 pos to coil 2 neg and hook the 2 remaining wires which will be 1pos 1 neg to the mono channel or BRIDGE and you will se the exact same power and frequiency. That is wired in series . Parallel will draw a 1 ohm load thus bye bye baby to your OVERPRICED KICKER. I love their subs got 2 of their cvr12dvc4s but no love 4 their amps. You got my back on this SHAWN? Or am i hookn hams up to pineapples. LOL GOOD LUCK HENESSEY |
|
Bronze Member Username: TkzoneClearwater, Florida USA Post Number: 24 Registered: Jan-10 | Somebody tell me im wrong if i am . SOMEONE SAY SOMETHN |