New member
Username: Mauskar Post Number: 1 Registered: Feb-10
Posted on
Tuesday, February 02, 2010 - 01:23 GMT I have 1 alpine type R 1242D DVC. I believe the sub is rated at 500 RMS (250 each VC). If the VC is 4ohms, can it only be wired for a 4 ohm load? I was looking at the Alpine MRP-M650 or Alpine MRP-M500 to power this- is this enough???
Platinum Member
Username: Insearchofbass York,
Pennsylvania
Post Number: 13294 Registered: Jun-04
Posted on
Tuesday, February 02, 2010 - 02:05 GMT a single dual 4 can be wired to 2 ohms or 8 ohms an alpine m500 is enough
New member
Username: Mauskar Post Number: 2 Registered: Feb-10
Posted on
Tuesday, February 02, 2010 - 02:11 GMT So just to make sure i understand this, the impedance on the sub doesnt really matter as long as the amp can handle the impedance.... A DVC 4ohm sub can be wired to an amp @ 2ohms??? thanks
Platinum Member
Username: Insearchofbass York,
Pennsylvania
Post Number: 13295 Registered: Jun-04
Posted on
Tuesday, February 02, 2010 - 02:20 GMT it matters if your trying to get the most power from the amp.....like if the alpine amp puts out 500 watts at 2 ohms thats what you want....yes a single dual 4 ohm can be wired 2 ohms or 8 ohms
New member
Username: Mauskar Post Number: 3 Registered: Feb-10
Posted on
Tuesday, February 02, 2010 - 02:24 GMT Yea, Im trying to get 500x1 @ 2 ohms. Is it possible to accomplish that with this 4 ohm sub?
Platinum Member
Username: Insearchofbass York,
Pennsylvania
Post Number: 13301 Registered: Jun-04
Posted on
Tuesday, February 02, 2010 - 02:44 GMT with a dual 4 ohm sub which you have yes
New member
Username: Carpetking Post Number: 2 Registered: Feb-10
Posted on
Monday, February 15, 2010 - 03:27 GMT i have jl 1000/1 can i hook it up to 4 subs or do i need a four ch amp ?
Bronze Member
Username: Ford_toyota Post Number: 12 Registered: Feb-10
Posted on
Monday, February 22, 2010 - 12:50 GMT Have you solved the problem now? http://www.turbochargerpros.com/jaguar_supercharger.html Jaguar SuperCharger