1 pair of Differential-Balanced Inputs Fully variable on-board crossover: (40Hz - 200Hz), selectable-slope LP (12 or 24 dB per octave) 2-channel Preamp Outputs: independent active filter, parallel with amp filter or full-range Bass EQ that is parametric with variable bass boost up to 15dB and you can use a Remote Bass Control (optional RBC-1) Fully variable Infrasonic Filter: 24dB/octave from 15-60Hz Output Polarity Reversal switch allows instant output polarity reversal Dual mono speaker output connections that accepts up to 8 gauge wire 12 volt and Ground connections accept 4 gauge wire or 2 gauge or 1/0 gauge
Specifications: Rated Power: 1000 watts RMS at 1.5 ohm - 4 ohms (at 11V-14.5V) THD at RMS Power: <0.05% @ 4 ohm S/N Ratio: >95dB below rated power Frequency Response: 5Hz - 500 Hz Damping Factor: >500 at 4 ohms /50Hz Input Range switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 19.7"L x 9.25"W x 2.36"H
The gain hasnt passed 25% since i've had this amp. Comes with original box/manual.
JL 300/2 - $250
Features: R.I.P.S. (Regulated Intelligent Power Supply) Absolute Symmetry Class A/B Circuit RealSink (Heat-Management System) Differential-Balanced Input Topology (1 Pair of Inputs) On-Board Crossover : Fully-Variable (50~5Hz), selectable slope (12dB or 24dB/octave) LP or HP Preamp Output : selectable as pass through, tracking LP or tracking HP Speaker Output Connection : accepts up to 8AWG wire +12V and Ground Connections : accepts up to 4AWG wire