Bronze Member Username: Chris_ballerPenetanguishene, Ontario Canada Post Number: 14 Registered: Jun-04 | when i talked to you earlier you said you would help to bridge my subs. So you know i have a sony xm 4045 amp now since the rockford fosgate 1 i bought didn't work, and it was the last 1 in the store. you said my speakers were svc with 8ohm coils, they're pyle ppa. could you tell me what you mean by 8 ohm coils? |
Silver Member Username: JayjPost Number: 108 Registered: May-04 | You will need to wire them like this diagram to get a 4 ohm load. Then you can bridge your 2 wires from the subs by hooking the positive wire to the positive terminal of the amp on the FIRST channel. Then hook the negative wire to the negative terminal on the SECOND channel. And that will be bridged. http://www.crutchfieldadvisor.com/ISEO-rgbtcspd/learningcenter/car/subwoofers_wi ring.html?subs=2&impedance=SVC8 |