|
Bronze Member Username: Msand951Riverside, Ca Usa Post Number: 78 Registered: Mar-07 | my question is will my pcx2400 amp be good enough for this sub . my amp according to the manual , says it will due 1600rms @ 4ohm bridged. do you think it will be ok if i bridge it to a 2ohm load to at least get 2000rms if possible. someone is selling me a 18 in fi btl for 200 in new condition i think its a good deal and want to jump on it . but what do you guys think. im aware of the big 3 , alt, and battery upgrade im going to have to do. |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9664 Registered: Jul-06 | if the amp is 4 ohm stable bridged it will not handle 2 ohm. Don't do it. |
|
Bronze Member Username: Msand951Riverside, Ca Usa Post Number: 79 Registered: Mar-07 | if the sub is a dual 2 0hm and i wire it to a 4 ohm load will 1600rms be enough or would it harm the sub for underpowering it. |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9676 Registered: Jul-06 | You can not damage a speaker from underpowering. It will be fine. http://www.bcae1.com/2ltlpwr.htm |
|
Bronze Member Username: Msand951Riverside, Ca Usa Post Number: 81 Registered: Mar-07 | MS the damn sub is a dual 1 ohm. Any suggestions please.i found this http://cgi.ebay.com/Used-Precision-Power-PCX2400-Amplifier_W0QQitemZ190285679679 QQcmdZViewItemQQptZCar_Amplifiers?hash=item190285679679&_trksid=p3286.c0.m14&_tr kparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C 294%3A50 |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9743 Registered: Jul-06 | Then you need a class D 2 ohm stable amp. |