|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 156 Registered: Oct-08 | what exactly is the big 3 ive been told few times but not quite sure still... can someone give me some detailed description.. also some pics.. thanks |
|
Gold Member Username: Van_manBoston South, MA Post Number: 4529 Registered: Mar-06 | Thank Killa for the pic. http://i267.photobucket.com/albums/ii306/Killerzracing71/big34n00bs1cv.jpg |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 158 Registered: Oct-08 | very good thaks alot marc and killa also i haven't looked yet but them 3 wire do i just take them off and replace with the 0ga wire? |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 160 Registered: Oct-08 | also what are the benifits of doing the big 3? |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9399 Registered: Jul-06 | LMAO @ him grounding to the radiator support Grounds need to be to frame (or solid part of body in case of unibody) |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 161 Registered: Oct-08 | what are the benifits of the big 3 |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9403 Registered: Jul-06 | Stock wires are often a bottleneck and don't allow enough current to flow to the amp. |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 163 Registered: Oct-08 | oic thanks for the info |
|
New member Username: ErbgottieM-Town, Upper Cackal... US Post Number: 6 Registered: Jul-08 | Here's the best explanation you're gonna get: Just put the ground wire on one of the bolts on the Alt |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 168 Registered: Oct-08 | why i would rather do it right the first time |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 173 Registered: Oct-08 | ok i was looking at my alt and it looks to me that my wire form my batt to alt plugs in... now do i put 0ga wire on it if the wire plugs in? |
|
Silver Member Username: TylerslivaSt.Ignace, Mi U.S. Post Number: 174 Registered: Oct-08 | how do i put the 0ga on and what do you think my voltages will run at with stock electrical is chevy silverado 98... with a AQ1200D, or hifonics bxi 1608D |
|
New member Username: 02cavvyPost Number: 1 Registered: Jan-09 | I thought you were supposed to fuse the alt to positive wire near the battery in case of a power surge. I just noticed the picture is saved as "big3 4 n00bs." lol |
