Quick question

 

Bronze Member
Username: That_guy_u_dont_know

Kaplan, Louisiana United States

Post Number: 58
Registered: Dec-08
i hooked my amp up put hooked up the sub nothing comes out the sub at all not even a slight movement at any volume and yes everything is hooked up right

wat could this be?
 

Gold Member
Username: Talon01

Team Revolution , Pa Usa

Post Number: 1946
Registered: Jun-07
power light on?
 

Bronze Member
Username: That_guy_u_dont_know

Kaplan, Louisiana United States

Post Number: 59
Registered: Dec-08
yeap the power light is green and not blinking nothing
 

Platinum Member
Username: Wingmanalive

A pic is worth 1000 posts!!

Post Number: 19547
Registered: Jun-06
Muted?
 

Gold Member
Username: Talon01

Team Revolution , Pa Usa

Post Number: 1947
Registered: Jun-07
rca's connected?
get a 9v batt and touch the speaker wires from the sub to the connections on top and see if it pops. just tap it dont hold it!!!
 

Bronze Member
Username: That_guy_u_dont_know

Kaplan, Louisiana United States

Post Number: 60
Registered: Dec-08
rcas or connected and that sounds like it will mess up something rather not risk that

and paul im not that stupid
 

Gold Member
Username: Talon01

Team Revolution , Pa Usa

Post Number: 1948
Registered: Jun-07
do you have any way to test the sub? new or used? it wont hurt it btw i do it all the time.
correct rca connect from hu?
 

Bronze Member
Username: That_guy_u_dont_know

Kaplan, Louisiana United States

Post Number: 63
Registered: Dec-08
i had my L7 15 hooked up to it and it worked fine took it out cause i sold it and i had a old JL 10 layin around so i decided to hook it up and well nothing happens (i took the amp out with the L7 then put it back in when i wanted to put the 10 in)used sub i have it hooked up in my room and its workin so i dont think its the sub yea the rcas or connected right i havent changed anything since the last time the amp was in
 

Platinum Member
Username: Wingmanalive

A pic is worth 1000 posts!!

Post Number: 19548
Registered: Jun-06
"and paul im not that stupid"


Well sometimes I am so it never hurts to ask.

Take a close look at the tinsel leads.
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2241
Registered: May-07
Test your amps output with a multi-meter and your box terminals to see if everything is hooked up.
 

Bronze Member
Username: That_guy_u_dont_know

Kaplan, Louisiana United States

Post Number: 64
Registered: Dec-08
no terminal straight to sub..... tinsel leads? that would be and yes i know stupid question
 

Silver Member
Username: Tylersliva

St.Ignace, Mi U.S.

Post Number: 120
Registered: Oct-08
u know what i would do i would find someone that will let you try and hook their sub to it and see if it works... if it dont work somthin is wrong with amp... check all fuses and connections
 

Platinum Member
Username: Wingmanalive

A pic is worth 1000 posts!!

Post Number: 19550
Registered: Jun-06
Tinsel leads. You know, the thin silvery wires that connect the coil to the terminals? Check to see if one of them jarred loose. It happens.
 

Bronze Member
Username: That_guy_u_dont_know

Kaplan, Louisiana United States

Post Number: 65
Registered: Dec-08
i got it guys i changed the rcas to a diffrent one and it seems to work now lol
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us