|
Bronze Member Username: Andrew16639Miramar, FL United States Post Number: 33 Registered: Sep-08 | How do you get the amp to push past 2200watts. Specifications Model AQ2200D Digital Monoblock 1 ohm stable Input Sensitivity 0.2v-8v Variable Low Pass Filter 20Hz-200Hz @ 24dB/Oct Subsonic Filter 10Hz-50Hz @ 24dB/Oct Output Master / Input Slave, 2 amps linkable connection Remote Level Control Clipping Display Led Signal to Noise Ratio 90dB External Fuse Rating 200 Amps, 400 Amps Linked Tested Voltage and THD 14.4V & 1% THD 4 ohm power 740 x 1 2 ohm power 1300 x 1 1 ohm power 2200 x 1 1 ohm Power @ 16V @ 1% THD 2500 x 1 1 ohm Power @ 16V @ 10% THD 3400 x 1 2 ohm Linked Power @ 14.4V @ 1% THD 4400 x 1 Dimensions 17.71"(L)x9.27"(W)x2.35"(H) http://www.audioque.com/aq/AQamps2200D.htm |
|
Gold Member Username: BonhamdPost Number: 1309 Registered: Nov-07 | it is rated at 2200 RMS the only way you could get more power out of the amp is to drop it to a lower ohm load this is only safe if you know what you are doing and have a good electrical system to back it up |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 8646 Registered: Jul-06 | Stop asking stupid questions...... the amps rated 2200w, its not gonna do more than that. duh |
|
Gold Member Username: Van_manBoston South, MA Post Number: 4390 Registered: Mar-06 | run it at 16 volts at 1/4 ohm. |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 8651 Registered: Jul-06 | hahaha |
|
Bronze Member Username: Andrew16639Miramar, FL United States Post Number: 34 Registered: Sep-08 | what is THD and how do you raise it. also how do you get or run 16 volts |
|
Gold Member Username: N2audioLawrence, Ks USA Post Number: 1647 Registered: Mar-04 | you want to raise THD huh?? GENIUS! You run 16 volts by building a secondary electrical system for your car which is installed in addition to the standard 14v system. FWIW (I'm guessing very little) with a 2200w amp it would take an additional 1000w or so, and a speaker that could make use of it, to produce a noticable improvement in output. |
|
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 8654 Registered: Jul-06 | haha this guy is a real genius. First of all that amp won't run at 1/4 ohm. Second lower THD is better not higher lol. |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 5521 Registered: Dec-05 | i think a 2.2K rms system is plenty loud for you and all of us, so stop sking stupid ways to blow your sh1t up |
|
New member Username: Steve_tallicaPost Number: 3 Registered: Feb-09 | what do you guys think id better db drive, audioque or image dynamics for amp |