|
Silver Member Username: QuirkySA, Texas Post Number: 316 Registered: Feb-07 | So I got a Viper 350HV installed last weekend at best buy. I would like to do some modifications to it. The Alarm comes with one siren but I would like to add 3 more sirens: 2 in the cab and 1 extra exterior siren. I would also like to install some strobes inside the cab linked to the alarm. Unfortunately I did not get my installation manual and direct electronics website is not letting me create an account so I can download it. Can anyone tell me how I would go about installing the sirens and strobes? |
|
Gold Member Username: Surferdude9371Get loud or go home.... Post Number: 1295 Registered: Mar-07 | they need to be tied into the remote wire so when it goes off so do they |
|
Silver Member Username: QuirkySA, Texas Post Number: 317 Registered: Feb-07 | do you know the color of the remote wire or what to look for? |
|
Gold Member Username: Surferdude9371Get loud or go home.... Post Number: 1296 Registered: Mar-07 | no sorry bud but you can eliminate a couple by finding the ground and power |
|
Silver Member Username: QuirkySA, Texas Post Number: 319 Registered: Feb-07 | that's a start, thanks. |
|
Gold Member Username: The_image_dynamicSan Diego, California Post Number: 4590 Registered: Dec-06 | http://www.directeddealers.com/manuals/ig/viper/N426V_07-05.pdf |
|
Gold Member Username: LoudonPost Number: 2762 Registered: Jun-04 | make sure u watch the install also .. their soldiering isnt always the best at best buy .. can easily lead to a fire or car issues .. also .. with that alarm .. makes sure u know where ur sensitivity is set ... to high will make for a pain the butt if someone sneezes near ur car and the alarm goes off .. |
|
Gold Member Username: MgbcsMaple Grove, Minnesota Post Number: 2644 Registered: Dec-06 | Good luck with the install, but can you say overkill? |
|
Silver Member Username: KingtutusLincoln, Nebraska U.s.a Post Number: 453 Registered: Dec-07 | hey bcs long time no c. so what have u been up to |
|
Gold Member Username: MgbcsMaple Grove, Minnesota Post Number: 2645 Registered: Dec-06 | Just school man...18 credits is killing me. I don't want to dump on Ben's post tho, hit me up with a PM if you need anything. |
|
Silver Member Username: QuirkySA, Texas Post Number: 320 Registered: Feb-07 | thanks guys, that helps a lot. Here is what I guess would be the best approach- I found the wire that goes to the siren; If I splice and lead a wire from the siren wire to a relay, I could then attach my 3 other sirens and strobe system to the relay. Would this work? |
|
Gold Member Username: ShortysetniesAndrew Capps, NC US Post Number: 2885 Registered: Mar-06 | Thats exactly what I did and it worked fine |
|
Silver Member Username: QuirkySA, Texas Post Number: 322 Registered: Feb-07 | Alright, thanks Andrew. |