I have a 15" kicker L7 powered by a zx1000.1 mono block amp. The sub is now not producing any sound or movement. It does not seem blown because it is not seized up and also it would still move but just sound terrible right? I have checked all my wire connections. My rca's are fine in the back of the head set as well as the remote wire. The subs wiring being parallel is also fine and connected right. The wires from the sub to the speaker terminal inside the box are fine as well as the wires to the amp from the box. I checked all the fuses and battery connections and there all good too. The green power light is on on my amp too so it should be red if the amp was messed up. I'm so confused and have been real annoyed with this for about a week already. If anyone could help me out I would definitly appreciate it!
The amp isn't in protect period? Doy uo hear the amp click to turn on when you start up? What size power wire are you using? What headunit and vehicle?
Double check that your RCA are hooked up to OUTPUT on the Head Unit and INPUT on the amp....may seem easy too easy to miss but a friend of mine screwed this up.
the amps green light is on so its not in power protect mode, i am using the recommended 0g wire the ground and power both the same length with a kicker fuse that came with my amp, i have a 2008 chevy cobalt and i am running a sony xplod head unit.
it was working fine for like 2 weeks then all of a sudden the sound just stopped and everything is as it was, the rca's are ok in the back of the head unit and are in the output spots and not crossed, the rca's are in the input spot for my amp too...
Well my friend brought a diff sub over and we just touch the wires to it to see if it would work and the sub worked. So its not the amp its gotta be the sub that's messed up or the terminals in the back of the box. I'm gonna see if the sub works just touching the wires to the sub without going to the terminal and see if its that or not